Hifiverse

Standlautsprecher - Wharfedale ELYSIAN 4R

Beschreibung, Bilder, technische Daten und Spezifikationen

Wharfedale ELYSIAN 4R
Bildquelle - (c) Wharfedale

Wharfedale's ELYSIAN 4R is the biggest three-way tower of the ELYSIAN R Series, and the British maker calls it the statement model of the range. It replaces the original ELYSIAN 4 and carries the Generation R changes, among them a reworked crossover, tighter driver manufacturing and further cabinet tuning against resonance. Wharfedale offers it in Walnut High Gloss, Matte Black and Lunar Grey, each with matte black trim.

Key specs that matter

Two 8.5-inch (220 mm) bass drivers and a 6-inch (150 mm) midrange use coated glass fibre matrix cones, a material Wharfedale picked for strength, low mass and controlled damping, and treble comes from a 27 x 90 mm AMT unit. The crossover points are 340 Hz and 3.1 kHz, so the midrange cone covers the band between them alone. Response is 30 Hz to 22 kHz within 3 dB, with bass extension to 24 Hz at -6 dB. Sensitivity is 92 dB at 2.83 V and 1 m, nominal impedance is 4 Ohm with a minimum of 3.2 Ohm, and the maker lists the speaker as compatible with 8 Ohm amplifier outputs, and Wharfedale recommends amplifiers of 15 to 250 W. Peak SPL reaches 110 dB. Each tower stands 1188 mm tall on its plinth, 402 mm wide and 462 mm deep including terminals, and weighs 49.5 kg.

Engineering and use context

Inside, the reflex cabinet is split into two chambers of 38 and 79.4 litres. Low frequencies vent through the Slot-Loaded Profiled Port, a Wharfedale design meant to extend bass, cut turbulence and reduce how much placement changes the bass. The AMT tweeter has a pleated diaphragm. In the crossover, the bass section uses coils with high-silicon-iron cores, the midrange and treble sections use air-core coils, and the boards follow a direct-path PCB layout with Super Audiophile polypropylene capacitors and low-inductance resistors. Wharfedale gives a 3-year warranty, and the series also includes the ELYSIAN 1R and 2R standmounts, the ELYSIAN CR centre and dedicated stands for the smaller models.

Pairing

The high sensitivity lets a modest amplifier drive the 4R to real levels, yet the 4 Ohm rating and a low impedance minimum in the bass region favour a solid-state design with a strong power supply over a small tube amplifier. Rooms need enough floor space and volume for a large, heavy tower with deep bass reach, and the ELYSIAN CR centre allows a matching front stage for a home cinema.

Alternatives

The Wharfedale ELYSIAN 3R is the second, more compact tower in the R line, with twin 7-inch woofers and a slimmer 263 mm cabinet.

Spezifikationen

  • Modellbezeichnung

    ELYSIAN 4R

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000

  • Empfindlichkeit (dB at 1 W/1m)

    92

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    15 - 250

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    128.5 x 59.5 x 48.0

  • Gewicht (kg)

    49.5

  • Offizieller Link

Weitere Komponenten