Hifiverse

Standlautsprecher - Tekton Design ELECTRON

Beschreibung, Bilder, technische Daten und Spezifikationen

Tekton Design ELECTRON
Bildquelle - (c) Tekton Design

The Electron is a four-way floorstanding loudspeaker from Tekton Design, listed in the Mid Towers group at USD 2,200 per pair, reduced from USD 2,880. Tekton describes it as building on the Double Impact in a smaller footprint, with a scaled-down version of the Double Impact driver configuration. It is manufactured in the USA by the company in Orem, Utah.

Key specs that matter

Each speaker uses two 203 mm high-output Electron transducers, two 102 mm mid-bass transducers and the patented tweeter array. Frequency response is 30 Hz - 30 kHz. Sensitivity is 95.0 dB (2.83 V/1 m). It is a 4 ohm design, and power handling is 200 W. Dimensions are 1219 x 254 x 346 mm (H x W x D), and weight is 28.35 kg.

Engineering and use context

Tekton makes the Electron under US Patent 9247339 as a four-way loudspeaker. Its tweeter array is low-mass and polygon-oriented, and Tekton states that it gives the focused output of a horn without the associated distortion.

Against the Double Impact, the driver sizes are reduced from 254 mm to 203 mm in the woofer section and from 152 mm to 102 mm in the mid-bass section. Sensitivity is 95.0 dB against 98.82 dB, power handling is 200 W against 400 W, and the Electron weighs about half as much as the 53.5 kg Double Impact.

Beryllium tweeter upgrades can be ordered for the array, and an optional upgrade package is offered. The cabinet is available in a range of paint colours. Grilles ship separately from the loudspeakers, and footer styles are selectable.

Pairing

An amplifier stable into 4 ohms is required. Optional terminals allow bi-wiring, with discrete cables for high and low frequencies, or bi-amping with dual amplifiers, each at USD 150. The 200 W rating is power handling, not a minimum amplifier power.

Alternatives

The Tekton Design Electron SE is the upgraded version, with two 203 mm SE woofers, two 127 mm mid-bass drivers, 96 dB sensitivity and 300 W power handling, at USD 3,140 per pair.

Spezifikationen

  • Modellbezeichnung

    ELECTRON

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Empfindlichkeit (dB at 1 W/1m)

    95

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    <200

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    121 × 25.4 × 34.6

  • Gewicht (kg)

    28.35

  • Offizieller Link