Hifiverse

Standlautsprecher - Ascendo D9 Active

Beschreibung, Bilder, technische Daten und Spezifikationen

Ascendo D9 Active
Bildquelle - (c) Ascendo

The D9 Active is the active version of the D9 floorstanding loudspeaker from the German manufacturer Ascendo, which produces in Heilsbronn. A stereo pair is supplied together with two DNA 1000.2 HE power amplifiers. Besides its coaxial point source, the D9 carries four further drivers. Two versions are offered, the standard D9 and the D9-C, whose cabinet is 1.5 cm taller.

Key specs that matter

With its rear tweeters active, the D9 Active is a four-way loudspeaker based on Ascendo's SASB MKII technology, and with them switched off it is a three-way. At the front, a shielded coaxial driver combines a 25 mm neodymium soft dome with an 18 cm midrange cone on an XP membrane. Two 18 cm drivers inside the bass module have NRSC carbon fibre membranes, and the woofer section is rated to 30 Hz (-3 dB). Its rear Double TOS array consists of two 27 mm magnesium tweeters without ferrofluid. Total system power is 1000 W per speaker. Width is 24 cm and depth 45 cm for both versions, height is 112.5 cm for the D9 and 114 cm for the D9-C, and weights are 43 kg and 48 kg.

Engineering and use context

Ascendo states that the amplifier power goes directly to the drivers. Every DNA 1000.2 HE amplifier can be configured as a mono amplifier at 1000 W sinus, as a two-channel unit at 2 x 500 W sinus, or as double mono with 500 W on each channel. Input and output channels are adjustable to listening volume, repertoire, personal taste and the drivers themselves, and the company says this improves the time-domain behaviour of the loudspeaker. In mono operation all amplifiers are operated from a central browser interface.

Each amplifier housing measures 360 x 155 x 255 mm, the last two figures depending on orientation, needs a further 15 mm for its feet and weighs 16.3 kg. Four removable magnetic bases allow it to stand in any orientation. Cabinets are lacquered in high-gloss black or white, and further piano lacquer colours are available to order.

Pairing

A preamplifier or a source with variable output is required. Over the AVB network a DNA 1000.2 HE amplifier accepts any input signal and distributes up to 8 channels losslessly over CAT lines to further amplifiers of the same type, active Ascendo loudspeakers or Ascendo subwoofers. The amplifier is also suitable for passive loudspeakers.

Alternatives

The Ascendo D7 Active is the slimmer model of the same series, with a single rear TOS tweeter and a woofer section rated to 32 Hz.

Spezifikationen

  • Modellbezeichnung

    D9 Active

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30 (woofer)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    1000

  • Größe (sm)

    24 x 114 x 45 (version D9-C; base 112.5 cm)

  • Gewicht (kg)

    48 (D9-C; base 43)

  • Offizieller Link

Weitere Komponenten