The Clarity 66 is a two-way floorstanding loudspeaker from Radiant Acoustics of Nørager, Denmark, the company founded by Peter Lyngdorf that brings together HiFi Klubben, PURIFI and Nordic Hi-Fi and sells direct to consumers. It is the brand's first floorstanding model, after the Clarity 4.2 and Clarity 6.2 stand-mount speakers, and deliveries began in April 2026. Each unit is made in Denmark and tested in Nørager. A pair costs EUR 7,998 or USD 9,998, and the warranty is 10 years.
Key specs that matter
Frequency range is 24 Hz - 20 kHz. Sensitivity is 86 dB (2.83 V/1 m), and nominal impedance is 4 ohms. Two 165 mm PURIFI USHINDI woofers (PTT6.5X08-NAA-09) work with a custom AMT tweeter, crossed over at 2.4 kHz. A Superflare port tuned to 30.5 Hz loads the enclosure, and power handling is 350 W. Connection is single-wire through gold-plated terminals. Each speaker measures 1,025 x 222 x 355 mm (H x W x D) and weighs 40 kg, or 46 kg packed. Finishes are walnut veneer, oak veneer and black matte lacquer.
Engineering and use context
Both woofers run in parallel in a true two-way configuration, with a single crossover region. Here the USHINDI units have aluminium cones with a concave dust cap, while the Clarity 4.2 and Clarity 6.2 use paper cones, and PURIFI's PureDrive motor and NeutralSurround are part of the design. The tweeter is a fully symmetrical dual-magnet AMT with a folded diaphragm, made for Radiant by sister company DALI. It sits in a PURIFI beam expansion waveguide with five aluminium fins. Its shape narrows the tweeter's directivity to match the woofers around the crossover point, and the fins widen dispersion at higher frequencies.
PURIFI co-founder Lars Risbo developed the Superflare port for this model with FEA-based aerodynamic optimisation. It is rear-facing, close to the floor and symmetrical inside and outside the cabinet. According to Radiant, the tall cabinet is modelled as a constant-cross-section transmission line, with distributed damping that suppresses the primary standing wave around 150 Hz. The iron-free crossover uses non-magnetic baked air coils and polypropylene film capacitors, and about 21 of its component values were set by a PURIFI computer optimisation algorithm.
A 15 mm CNC-machined aluminium front baffle is bonded to 21 mm MDF, with an extra fluted plate underneath. Steel rods run from the FEA-developed bracing through to the woofers and anchor into a steel plate on the rear panel. Seven shaped iCell elements of recycled cellulose damp the interior.
Pairing
An amplifier stable into 4 ohms with at least 100 W per channel is required. The terminals are single-wire only.
Alternatives
Radiant Acoustics has no other floorstanding loudspeaker, as the Clarity 4.2 and Clarity 6.2 are stand-mount models.