Hifiverse

Standlautsprecher - Cinnamon Audio Cassia

Beschreibung, Bilder, technische Daten und Spezifikationen

Cinnamon Audio Cassia
Bildquelle - (c) Cinnamon Audio

The Cassia is the first loudspeaker from Cinnamon Audio and the reference model of the Portuguese company, which is run by the brothers Ricardo and Diogo Canelas. Ricardo Canelas holds a PhD in engineering, high-performance computing and fluid mechanics. Each Cassia system is built by hand to order, with lead times from three months for standard options, and the price is USD 54,995 per pair.

Key specs that matter

This floorstanding loudspeaker is a pure dipole with no box and a hybrid topology - passive analogue mids and highs, reamplified active lows. Sensitivity is approximately 97 dB (1 W/1 m) and nominal impedance is 10 ohms. Frequency response is 25 Hz - 30 kHz (±3 dB). An internal 250 W amplifier with DSP, frequency and time corrected, drives the bass section. Each unit measures 1,450 mm high, 410 mm wide and 600 mm deep and weighs 75 kg.

Engineering and use context

Cinnamon names three design goals - pure dipole radiation, controlled and matched directivity, and adjustable correction of the low frequencies. Above the bass section sit a 203 mm mid coupler driver and a horn-loaded AMT driver, integrated by a phase-aligned, low-order crossover in which each component was individually selected and matched. That crossover is housed in an external crossover box, which isolates the sensitive components from vibration. Two 381 mm drivers are active below 150 Hz. All drive units are made in Europe, with very low tolerance voice coil construction and FEA-optimised structures.

Only the lowest frequencies are corrected and reamplified inside the speaker. Its only input is the ordinary speaker cable from the owner's amplifier. According to Cinnamon, a 5 W SET amplifier can drive the Cassia across the full frequency range.

Baffles come in hand-oiled birch, in one of around 50 exotic veneers or in any RAL colour with gloss, matte or metallic paint. Solid hand-brushed aluminium parts are hand waxed. The system price includes the loudspeakers, the external crossover box, power and signal cables, and installation and setup by the maker.

Pairing

An amplifier with conventional speaker outputs is required, and a low-power single-ended triode amplifier is within Cinnamon's stated range. A mains socket is required at each speaker for the internal bass amplifier.

Alternatives

The Cinnamon Ellipticum is the smaller dipole floorstanding loudspeaker of the range, with one 305 mm bass driver active below 150 Hz in a 1,050 mm tall unit weighing 45 kg.

Spezifikationen

  • Modellbezeichnung

    Cassia

  • Untere Grenzfrequenz +/- 3dB (Hz)

    25

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Empfindlichkeit (dB at 1 W/1m)

    97

  • Impedanz (Ohms)

    10

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    250

  • Größe (sm)

    145 x 41 x 60

  • Gewicht (kg)

    75

  • Offizieller Link