The Primacy T6 is a fully active three-way tower speaker from JL Audio of Miramar, Florida, founded in 1975 by Jim Birch and Lucio Proni. Garmin completed the acquisition of JL Audio on 20 September 2023 and now sells and documents the product. Shown in late April 2026 and available from May 2026, it is priced at USD 90,000 per pair.
Key specs that matter
Each speaker carries a 25 mm dome tweeter, a 140 mm midrange and four 140 mm woofers. Built-in amplification is 1000 W RMS in total - 200 W for the tweeter, 200 W for the midrange and 600 W for the woofer section. Crossover frequencies are 240 Hz and 3 kHz, 24 dB/octave Linkwitz-Riley. Frequency response is 45 Hz - 20 kHz (±2 dB, anechoic), -3 dB at 35 Hz and -6 dB at 32 Hz. Maximum output is >112 dB SPL (peak short-term sine, 100 Hz - 3 kHz average, 1 m, half space). Latency is 4.46 ms at the analogue input. Inputs are one balanced XLR and one unbalanced RCA, both 50 kohms, plus Dante on two RJ45 ports. Dimensions are 1242 x 361 x 538 mm (H x W x D), and weight is 123 kg.
Engineering and use context
DSP filtering sits at the input of each of the three amplifier channels. An AKM triple-core processor with Velvet Sound technology runs at 32 bit/192 kHz for crossovers, delays and equalisation per driver section. Conversion uses an ESS SABRE ES9822PRO ADC and three ESS SABRE Reference DACs. JL Audio specifies switching amplifiers with surface-mounted output devices and short power paths, and separate triple-regulated power supplies synchronised to the sample rate.
Its enclosure starts as a one-piece alloy casting that includes the internal bracing and the woofer ports, and every assembly surface is CNC-machined to ±0.025 mm. The woofers are vented at the base of this casting, the midrange has a sealed secondary cast enclosure, and the tweeter is a sealed assembly. A 23 mm powder-coated aluminium extrusion forms the front baffle, with the midrange mechanically decoupled from it. Diaphragm materials differ by section - a pure carbon tweeter dome, a mineral-filled polypropylene midrange cone on an aluminium-alloy frame, and aluminium woofer cones on cast-alloy frames with DMA-optimised motors. Rear switches select an 80 Hz high-pass, a bass lift and a treble cut. Black gloss side panels are included, and replaceable cosmetic panels are sold separately.
Pairing
The matching source is the optional Primacy CS stereo centerpiece, connected over Dante. A preamplifier with balanced outputs connects through the XLR input.
Alternatives
JL Audio has no other tower speaker, and the Primacy S3 in the same range is a two-way stand-mount.