Hifiverse

Standlautsprecher - Davis Acoustics Ariane 5

Beschreibung, Bilder, technische Daten und Spezifikationen

Davis Acoustics Ariane 5
Bildquelle - (c) Davis Acoustics

The Ariane 5 is a three-way floorstanding speaker from Davis Acoustics of France. Davis describes it as the technical evolution of its earlier MAYA model, with a new woofer and a new tweeter. The recommended retail price in France is EUR 450 per speaker. Three finishes are offered - black ash, American walnut and light oak, each combined with a black grained front.

Key specs that matter

Design is three-way bass reflex with three drivers. Drivers are a 20 mm soft dome tweeter, a 17 cm (6.5 in) fibreglass midrange and a 17 cm (6.5 in) cellulose pulp woofer. Crossover frequencies are 300 Hz and 3000 Hz. Frequency response is 42 Hz - 20 kHz (±3 dB). Sensitivity is 92 dB. Power rating is 80 W nominal and 150 W maximum. Impedance is 4 ohms minimum. Dimensions are 90 x 19 x 26.2 cm (H x W x D), and weight is 13 kg per speaker.

Engineering and use context

Davis uses a soft cellulose dome for the tweeter, with a 20.4 mm voice coil and a foam suspension. Its braided fibreglass midrange cone carries a dispersion bullet in place of a dust cap and a dust ring around it. The datasheet gives the midrange as 17 cm, while the technology section of the product page quotes a 16.5 cm diameter.

Low frequencies come from a single woofer with a treated and damped cellulose pulp cone, a powerful magnetic motor and a decompressed chassis. The cabinet is bass reflex with a circular port on the front baffle. Screw terminals sit on the rear panel, and supports for the protective grille are set into the front.

Pairing

An amplifier stable into 4 ohms is required. The single pair of screw terminals allows single wiring only.

Alternatives

The Ariane 7 is the larger floorstanding model in the same Ariane range, with two 17 cm cellulose pulp bass drivers.

Spezifikationen

  • Modellbezeichnung

    Ariane 5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    42

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20000

  • Empfindlichkeit (dB at 1 W/1m)

    92

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    80 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    90 × 19 × 26.2

  • Gewicht (kg)

    13

  • Offizieller Link