Hifiverse

Standlautsprecher - Audio Note AN-E Ltd

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio Note AN-E Ltd
Bildquelle - (c) Audio Note

The AN-E Ltd is the field coil version of the AN-E loudspeaker from Audio Note (UK), a two-way ported design in which both drive units use electromagnets instead of permanent magnets. Each speaker comes with its own external field coil power supply. Development was led by designer-in-chief Andy Grove. Six Ltd versions are offered, from the AN-E/SPx Ltd with an internal crossover to the AN-E/SOOTTO Ltd Silver Signature, and the entry AN-E/SPx Ltd was listed at GBP 46,428.57 in the UK and USD 65,000 in the US per pair with power supplies.

Key specs that matter

Driver complement is a 25 mm silk dome tweeter and a 200 mm hemp cone bass driver with a foam surround. Both have a high flux field coil magnet assembly and a silver wire voice coil. Characteristic impedance is 6 ohms, and sensitivity is 97 dB (1 W/1 m). Frequency response is 18 Hz - 23 kHz (±6 dB, in room). Minimum amplifier power is 8 W RMS per channel, and maximum amplifier power is 150 W (unclipped) RMS per channel peak. Dimensions are 790 x 360 x 270 mm (H x W x D), weight is 29 kg per speaker for internal crossover models, and each PSU weighs 4 kg.

Engineering and use context

Audio Note (UK) developed cast magnet pots with a foundry in Britain's Black Country, using a fully ferritised heat treatment of nodular cast iron. The pole pieces are pure iron (Telar 57). Andy Grove quotes about 45 W for the first mild steel prototype bass unit and about 15 W for the production design. Passive supplies were tried first and rejected on two counts, their ability to absorb back EMF from the field coil and their stability against mains voltage variations. The production PSU is active, with an in-house mains transformer and stabiliser circuitry developed from the filament supplies of the M3 to M10 preamplifiers.

A 1.5 m AN-LEXUS umbilical cable with Neutrik four pin XLR connectors links each PSU to its speaker. The crossover is essentially first order and hardwired, with air-cored chokes and a new hand-wound resistor on a phenolic former, and the four Signature versions move it into an external box. A powder coated non-magnetic steel alloy is used for the tweeter faceplate, which sits on a cork gasket. Cabinets are birch ply with real wood veneer in high gloss, and pairs are matched to within 0.4 dB.

Pairing

Audio Note (UK) designs its speakers primarily for tube amplification. Two pairs of binding posts allow bi-wiring or bi-amping. Each PSU has its own IEC 320 mains inlet.

Alternatives

The AN-E/SPx AlNiCo is the permanent magnet AN-E in the same 790 x 360 x 270 mm cabinet, with a weight of 23 kg and a minimum amplifier power of 7 W.

Spezifikationen

  • Modellbezeichnung

    AN-E Ltd

  • Untere Grenzfrequenz +/- 3dB (Hz)

    18

  • Obere Grenzfrequenz +/- 3dB (Hz)

    23 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    8 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    79.0 x 36.0 x 27.0

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten