The 8381A SAM Adaptive Point Source Main Monitor is a free-standing five-way active main monitor from Genelec of Finland. It is designed and built in Iisalmi, and the price is about USD 32,000 per speaker. Each unit ships on a plywood-covered pallet with the top and bottom enclosures, two individually calibrated RAM-81 amplifier units, an accessory kit with incliner wedges and a 9320A SAM Reference Controller with GLM software access.
Key specs that matter
Two 380 mm cone Double Low Woofers and a 380 mm front woofer cover the low range, and the Quad Midrange System uses four 125 mm drivers. At the centre is a 125 mm coaxial midrange cone with a 25 mm compression tweeter (25 mm voice coil, 13 mm throat). Crossover points are 50-100 Hz (variable), 150-250 Hz (variable), 500 Hz and 1.8 kHz. Frequency response is 20 Hz - 35 kHz (-6 dB), with an accuracy of ±1.5 dB. Peak SPL is 129 dB or more (maximum output per pair), short-term maximum SPL is 126 dB or more (100 Hz - 3 kHz, 1 m, half-space), and long-term maximum SPL is 121 dB or more. Two Class D amplifiers give a total amplifier power of 5426 W. Connections are two analogue XLR inputs and outputs (10 kohms), two AES/EBU XLR inputs and outputs (110 ohms) and four RJ45 GLM network connectors. It measures 1458 x 500 x 694 mm (H x W x D) and weighs 162 kg.
Engineering and use context
Genelec calls the principle Point Source Continued Directivity (PCD) - important frequencies radiate from the same location in time alignment. In the Minimum Diffraction Coaxial (MDC) driver the dome tweeter assembly is in the centre of a curved flexible skin that joins the cone to the tweeter and to the driver chassis without acoustic discontinuity. Its cone profile forms an integrated directivity control waveguide for the tweeter, and the outer edge terminates in a Directivity Control Waveguide (DCW). The Quad Midrange System is an acoustically coaxial woofer solution that maintains directivity at lower frequencies, and the Double Low-Woofer system is recoil-compensated. A long, curved reflex tube ends in a wide flare on the rear of the enclosure.
Both RAM-81 units are 3U rack-mount Class D amplifiers of 11 kg each, calibrated to one cabinet at the Iisalmi factory. The MDF enclosure comes in two sections, 880 mm and 570 mm high. ISS circuitry sets a low-power sleep state when no input signal is present, and protection circuitry reduces the level when driver voice coil temperature reaches the safe limit. Finishes are black and white.
Pairing
A mixing console, monitor controller or audio interface with balanced analogue or AES/EBU outputs is required. Setup and control use the GLM network and the supplied 9320A controller.
Alternatives
Genelec has no other free-standing floorstanding main monitor in its range.