Hifiverse

Standlautsprecher - Piega ACE 50 WIRELESS

Beschreibung, Bilder, technische Daten und Spezifikationen

Piega ACE 50 WIRELESS
Bildquelle - (c) Piega

The ACE 50 Wireless is the active floorstanding speaker of Piega's Ace Wireless series, which also includes the ACE 30 Wireless bookshelf model and the ACE Center Wireless. Piega launched the series in January 2022, and UK sales started late in February. Its cabinet was created by designer Stephan Hürlemann in collaboration with Piega. A stereo pair consists of one Tx and one Rx speaker, and UK prices were GBP 2,090 for the Tx and GBP 1,900 for the Rx in aluminium, or GBP 2,140 and GBP 1,950 in black anodised or white.

Key specs that matter

This is a 3-way design in a sealed cabinet with one PIEGA AMT tweeter, one 120 mm MDS midrange and four 120 mm MDS bass drivers. Amplifier power is 200 W at less than 1% THD. Frequency response is 30 Hz - 25 kHz. Maximum streaming resolution and analogue input resolution are both 24 bit/192 kHz. Supply voltage is 100-240 V, 50/60 Hz. Each speaker measures 1050 x 140 x 160 mm (H x W x D) on a round foot of 250 mm diameter, and weighs 14 kg in silver or 16 kg in black and white.

Engineering and use context

AMT stands for Air Motion Transformer, and Piega specifies its tweeter for very low distortion and a linear frequency response. Inside the aluminium body, the MDS midrange driver sits in a separate enclosure of its own. Digital signal processors extend the low-frequency response of the slim cabinet, and DSP sound tuning includes dynamic loudness control. Piega states that the sealed aluminium cabinet gives high rigidity. Finishes are sandblasted silver, sandblasted black anodised and white lacquer,.

Both speakers carry their own amplification. The Tx (transmitter) sends the signal in hi-res quality wirelessly to one or more Rx (receiver) units. All streaming clients sit in the Tx - Apple AirPlay 2, Google Chromecast, Spotify Connect, Roon Ready, DLNA and Bluetooth 4.2. On the Tx are coaxial and optical S/PDIF inputs, HDMI eARC, an analogue stereo input, Ethernet and sockets for an external WiFi antenna and an external IR receiver. The Rx has an analogue mono input and a balanced stereo input and output on RJ45 connectors for standard CAT cables, with loop-through for daisy-chain wiring. A WiSA module allows a wireless link to a WiSA-certified TV and multichannel systems up to 7.1, built from Rx speakers only. The PIEGA Control app runs on Android and iOS.

Pairing

No external amplifier is required. A TV connects through HDMI eARC, an optical or coaxial cable, or wirelessly over WiSA. The matching centre speaker is the ACE Center Wireless.

Alternatives

The Premium 501 Wireless Gen2 is Piega's larger active 3-way floorstanding speaker, with an LDR 2642 MKII ribbon tweeter and a 180 W amplifier.

Spezifikationen

  • Modellbezeichnung

    ACE 50 WIRELESS

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    200

  • Größe (sm)

    105 × 14 × 16

  • Gewicht (kg)

    14 (silver) / 16 (black/white)

  • Offizieller Link

Weitere Komponenten