The Q Acoustics 5040 is the mid-size floorstanding speaker of the 5000 series, a range of stereo and home cinema loudspeakers that uses cabinet technology first deployed in the brand's Concept range. In the line-up the 5000 series sits between Concept and the 3000c range and also includes the 5010 and 5020 bookshelf models, the larger 5050 floorstanding speaker and the 5090 centre. Finishes are Satin Black, Satin White, Santos Rosewood and Holme Oak.
Key specs that matter
Drive units are two 125 mm (5.0 in) bass units and one 25 mm (1.0 in) treble unit, with the crossover at 2.5 kHz. Frequency response is 39 Hz - 30 kHz (-6 dB). Sensitivity is 91.5 dB (2.83 V at 1 kHz). Nominal impedance is 6 ohms, minimum impedance 3.0 ohms. Recommended amplifier power is 25 - 150 W. Effective volume is 27 litres. Including spikes and stabiliser, dimensions are 967 x 361 x 293 mm (H x W x D), and each speaker weighs 18.0 kg.
Engineering and use context
Both mid/bass units use the C3 Continuous Curved Cone. Its single continuous curve profile combines the bass behaviour of a straight conic cone with the midrange control of a flared cone. Substantial magnets are coupled to large voice coils, and Q Acoustics quotes a 50% increase in power handling over a comparable driver with a 25.4 mm voice coil. According to the company, the magnets also lower harmonic distortion because they bring the pole plate and yoke close to saturation.
Following the tweeter principle of the Concept series, the treble unit is hermetically sealed and mechanically isolated (floating) from the baffle, away from internal pressure modulations of the cabinet and the adjacent mid/bass drivers. Its inner chamber is vented for lower distortion and a lower crossover point.
Inside the enclosure, P2P (Point-to-Point) bracing supports only the parts that need stiffening. HPE (Helmholtz Pressure Equaliser) tubes are mounted inside the 5040 and 5050 cabinets against internal pressure build-up and standing waves. On the front, the baffle is laminated with a layer of butyl rubber and black acrylic trim as a damping layer, with no visible fixings. Each pair ships in two boxes with grilles, foam bungs, eight spike feet with covers and four rear stabilisers.
Pairing
An amplifier stable into 3 ohms is required. Within the series the matching centre speaker is the 5090, and the 5010 or 5020 bookshelf models complete a surround layout.
Alternatives
The Q Acoustics 5050 is the large floorstanding speaker of the 5000 series.