Hifiverse

Regallautsprecher - Boenicke Audio W5

Beschreibung, Bilder, technische Daten und Spezifikationen

Boenicke Audio W5
Bildquelle - (c) Boenicke Audio

The W5 is a miniature stand-mount loudspeaker from Boenicke Audio, the company of Sven Boenicke in Basel, Switzerland. Its current version is the MK2, offered in Standard, SE and SE+ versions that differ in resonators, capacitors and binding posts. Wood options are walnut, four sorts of oak, ash, core ash and cherry.

Key specs that matter

Sensitivity is 83 - 86 dB/W/m depending on frequency, and nominal impedance is 4 ohms. Each speaker weighs 3.5 kg (speaker only) and measures 29.3 x 10.6 x 23.1 cm (H x W x D), with a total height of 75 cm on its stands. Its driver complement is a 127 mm (5-inch) long-throw bass driver, a 76 mm (3-inch) widebander and a rear ambient tweeter, in a 2.8 litre enclosure.

Engineering and use context

The long-throw bass driver has an X-max of 9.25 mm, quoted by Boenicke as 18.5 mm of linear excursion. It is tuned to 50 Hz and runs with no crossover. Made to Boenicke's specification, the widebander has a tempered phase plug and a first-order high-pass filter with a KZK capacitor. On the rear panel is a miniature ambient tweeter, for which Boenicke quotes good off-axis response.

In the Standard version, a 2 cm parallel resonator is installed with the widebander. Internal wiring is orientation-optimised, silk-wrapped high-frequency stranded litz, and the terminals are KLEI Naked Harmony binding posts with a wooden Green Harmonia clamping nut.

The SE adds a 2 cm copper-gold parallel straight resonator on the bass-midrange driver and spiral resonators on the magnets of both drivers. Its widebander filter uses a Mundorf Silver-Gold-Oil capacitor bypassed by a 0.01 µF Duelund Tinned Copper Foil capacitor, and the binding posts are KLEI Classic Harmony Silver with Boenicke's cherry Terminal Tightening Nut. Green Harmonia wooden information carriers sit on both magnets.

For the SE+, series straight resonators of 2 cm copper and 2 cm copper-gold are installed at both drivers in addition to the parallel device. It also has an 18.5 cm spiral EMF resonator coil on the positive signal wire, a Harmonix RF-5700 at the widebander magnet and a proprietary acoustic phase linearisation network. All three versions include Boenicke's harmonisation.

Pairing

An amplifier stable into 4 ohms is required. The matching Boenicke amplifier is the p1.

Alternatives

The other Boenicke loudspeakers in the current range are floorstanding or centre models, so the W5 has no stand-mount alternative from the brand.

Spezifikationen

  • Modellbezeichnung

    W5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    83-86

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    29.3 x 10.6 x 23.1

  • Gewicht (kg)

    3.5

  • Offizieller Link