Hifiverse

Regallautsprecher - JBL Summit Ama

Beschreibung, Bilder, technische Daten und Spezifikationen

JBL Summit Ama
Bildquelle - (c) JBL

The Summit Ama is a 2-way stand-mount reference loudspeaker in the JBL Summit Series, developed at JBL's Acoustic Center of Excellence in Northridge, California. JBL names it the flagship of the series for the 200 mm woofer category. It was introduced at High End Munich in 2025 together with the Summit Pumori and Summit Makalu floorstanding loudspeakers and is the smallest of the three. Launch price was USD 19,995 per pair, matching stands included. The Summit name goes back to Project Everest, first introduced in 1985, and to Project K2, which followed it.

Key specs that matter

High frequencies come from the patented D2815K, a D2 compression driver with dual 38 mm annular ring Teonex diaphragms and dual motors. It is mounted on a large-format HDI Sonoglass horn. Below it sits the JW200PB, a 200 mm woofer with a triple-layer Hybrid Carbon Cellulose Composite Cone (HC4), dual inverted spiders, a 63.5 mm voice coil, a ferrite motor, a cast aluminium frame and a half-forward-roll surround. Enclosure type is bass reflex with a rear port. Inputs are dual sets of binding posts. Dimensions with grille are 476.3 x 308.0 x 336.0 mm (H x W x D), and the stand measures 550.6 x 412.2 x 412.2 mm (H x W x D).

Engineering and use context

HC4 is a proprietary formula of carbon fibre and pure-pulp front and rear surfaces with an internal core of closed-cell foam. According to JBL, this cone gives the stiffness, overall mass and structure needed for high output, low distortion and high power handling.

A MultiCap crossover network divides the signal between the two drivers. In place of traditional large capacitors it uses a larger number of smaller ones, and JBL quotes lower ESR as the result. Drivers and crossover components are housed in a cabinet with soft-curved walls and internally offset, multi-braced and damped construction, intended to minimise internal standing waves. Carbon fibre trim frames the baffle.

Two finishes are offered - Black High Gloss with Summit Platinum accents and Ebony Veneer with High Gloss and Summit Gold accents. Each speaker sits on a dual-leg steel and aluminium stand that is mass-loaded and damped. Its base rests on JBL | IsoAcoustics adjustable acoustic isolation feet.

Pairing

The dual binding posts allow bi-wiring or passive bi-amping with two stereo amplifiers. Single-wire connection is also supported. The matching stand is part of the package.

Alternatives

The JBL 4349 is a 2-way stand-mount studio monitor with a 300 mm woofer and a horn-loaded compression driver crossed over at 1.5 kHz.

Spezifikationen

  • Modellbezeichnung

    Summit Ama

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten