The Sub 3 is a compact active subwoofer from Dynaudio of Denmark, below the Sub 6 in the company's subwoofer range. Dynaudio describes it as a companion for any stereo or multichannel system, for films as well as music. Its sealed cabinet with a single woofer has the same dimensions as the earlier Dynaudio Sub 250 while carrying the full feature set of the larger Sub 600.
Key specs that matter
The driver is a 23 cm MSP woofer. Amplifier power is 300 W. Frequency response is 22 - 175 Hz (±3 dB at 85 dB). Its low-pass filter is adjustable from 50 to 150 Hz, phase switches between 0 and 180 degrees, and the high-pass filter for the main speakers has flat, 60 Hz and 80 Hz settings. Inputs are one RCA LFE and a stereo RCA pair, and outputs are a stereo RCA SAT pair and one RCA slave output. Maximum power consumption is 350 W, standby 0.5 W. The cabinet measures 266 x 276 x 320 mm (W x H x D), or 336 mm deep with feet and grille, and weighs 10.5 kg.
Engineering and use context
Dynaudio uses a sealed enclosure for the Sub 3. At the front is a double-thickness 37 mm baffle, curved in a way similar to the Contour loudspeakers, to increase its rigidity.
For an amplifier without a subwoofer output, the stereo RCA inputs and the SAT outputs pass the line-level signal through the Sub 3. An auto on/off function is built in, and the mains input accepts 100 - 120 V or 200 - 240 V at 50/60 Hz.
Both finishes, Black Satin and White Satin, come with a black grille.
Pairing
An integrated amplifier, preamplifier or streamer with line-level outputs or a sub out is required. The LFE input matches the subwoofer output of a home-theatre receiver or processor. In a pass-through setup the SAT outputs connect to a power amplifier or to active speakers with line inputs.
Alternatives
The Sub 6 is the larger sealed subwoofer in the Dynaudio range.