Hifiverse

Regallautsprecher - Buchardt Audio S400 MK3

Beschreibung, Bilder, technische Daten und Spezifikationen

Buchardt Audio S400 MK3
Bildquelle - (c) Buchardt Audio

The S400 MK3 is a two-way passive bass reflex stand-mount loudspeaker from Buchardt Audio, the Danish company that sells its speakers direct. Since its first prototype in 2016 the S400 has been part of the range, and the original was developed with a Klippel Near Field Scanner. Buchardt calls the MK3 a complete redesign that reuses only one part of the MK2, the binding posts. Price is EUR 2,300 per pair.

Key specs that matter

A 26 mm (1 in) custom aluminium dome tweeter with a matrix neodymium motor sits in a 7.5 in aluminium waveguide. Below it is a 7.5 in Satori Egyptian Papyrus paper cone mid/woofer with a neodymium motor. Crossover frequency is 2.2 kHz, with a first-order (6 dB/oct) slope on the woofer and a quasi-first-order slope on the tweeter. Nominal impedance is 4 ohms. Buchardt quotes sensitivity as 87 dB anechoic and 90 dB in-room, and in-room frequency response as 33 Hz - 20 kHz. Each cabinet measures 392 x 198 x 280 mm (H x W x D) and weighs 8.5 kg.

Engineering and use context

Inside the woofer are a BIMAX spider for linearity, a CCAW voice coil for reduced moving mass, a non-conducting fibreglass voice coil former, a vented pole piece for reduced compression and an extended copper sleeve on the pole piece for low inductance. Its paper cone uses Papyrus fibres made in-house. Compared with the MK2, woofer displacement is 65.5% greater while cabinet volume has grown by 18%. The MK2 used passive radiators, whereas the MK3 is reflex-loaded, and foam port plugs are supplied for reduced bass output.

An optimised back chamber gives the tweeter a low resonance point and enables the quasi-first-order crossover. Its dome is bonded directly into the waveguide. According to Buchardt, the waveguide provides directivity control and integration between tweeter and woofer, and the on-axis and off-axis responses are nearly the same.

Buchardt designed the crossover with Jantzen Audio. It has air-core inductors in high-purity copper wire up to 1.6 mm (14 AWG), Jantzen Cross Cap polypropylene capacitors and Superes wire-wound resistors. Cabinets are 15 mm HMR.E2 moisture-proof fibreboard with internal bracing. Finishes are black or white paint and walnut or natural oak real wood veneer, and black fabric grilles are included. Warranty is 5 years, or 10 years for the first buyer.

Pairing

An amplifier stable into 4 ohms is required. Buchardt gives no power figure and refers to its own amplifier power calculator.

Alternatives

Buchardt Audio's S400 MK2, introduced in 2021, is the previous generation with a 6 in woofer and a passive radiator.

Spezifikationen

  • Modellbezeichnung

    S400 MK3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    33

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    88

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    >30

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    39.2 x 19.8 x 28.0

  • Gewicht (kg)

    8.5

  • Offizieller Link

Weitere Komponenten