The Micro Evolution One, model code TAD-ME1, is a compact bookshelf speaker system from Technical Audio Devices Laboratories of Tokyo, Japan. It inherits the design concept of the TAD Evolution series and uses a smaller version of the Coherent Source Transducer than the Compact Evolution One. The pair was priced at USD 12,495 with a five-year parts and labour warranty, and TAD later released a TX version under the code TAD-ME1TX. Two finishes are listed - TAD-ME1-K in piano black and TAD-ME1-S in titanium silver.
Key specs that matter
Design is three-way bass reflex. Drive units are a 160 mm cone woofer and a 90 mm CST driver with a concentric cone midrange and a 25 mm semi-dome tweeter. Crossover frequencies are 420 Hz and 2.5 kHz. Frequency response is 36 Hz - 60 kHz, sensitivity is 85 dB (2.83 V/1 m, anechoic) and impedance is 4 ohms. Maximum input power is 150 W. Each unit measures 251 x 411 x 402 mm (W x H x D) and weighs 20 kg.
Engineering and use context
In the CST driver the beryllium tweeter diaphragm is mounted concentrically within the magnesium midrange cone, and TAD specifies it as a point source from 420 Hz to 60 kHz. Compared with the 140 mm CST, this 90 mm unit was made more compact in pursuit of the point source concept, and the directional characteristics of midrange and tweeter are matched to eliminate interference. Its semi-dome tweeter is shaped with HSDOM (Harmonized Synthetic Diaphragm Optimum Method). The woofer has a MACC (Multi-Layered Aramid Composite Cone) diaphragm, made of aramid fabric and non-woven materials that are formed separately and then laminated, and a magnetic circuit with linear drive characteristics.
According to TAD, the SILENT enclosure combines high-rigidity Baltic birch plywood with MDF for high internal loss. A 4 mm structural steel plate sandwiches the cabinet from left to right to reduce resonance. Instead of a front or rear port, the Bi-Directional ADS (Aero-Dynamic Slot) uses slit-shaped ports on both side panels with flared openings to the front and rear, and the symmetrical layout eliminates unwanted port output and standing waves inside the enclosure.
On the rear panel, separate LF terminals for the woofer and HF terminals for the CST are joined by shorting links. Supplied accessories are two short cables, a cleaning cloth and four anti-slip pads.
Pairing
An amplifier rated for a 4 ohm load is required. The separate LF and HF terminals allow bi-wiring. TAD offers the TAD-ST3 as the matching stand, sold in pairs in black or silver at USD 1,795 per pair, 16 kg per unit and 376 x 652 x 460.2 mm when assembled, with spikes and spike shoes in the kit.
Alternatives
The TAD Compact Evolution One TX is the larger bookshelf model of the Evolution series, with a 140 mm CST driver.