Hifiverse

Regallautsprecher - Logos Speakers MF-1 CX 10

Beschreibung, Bilder, technische Daten und Spezifikationen

Logos Speakers MF-1 CX 10
Bildquelle - (c) Logos Speakers

The MF-1 CX 10 is the midfield model in the range of active coaxial reference monitors from Logos Speakers s.r.l. of Naples, Italy. Logos was founded by Dave Mastrodonato, also known as the founder of DMSD Audio Tools, and was made official in 2024 after about six years of prototyping and development. In the current line-up it sits between the NF-1 CX 6.5 nearfield monitor and the M1 CX 12, alongside the SUB 12 subwoofer and the Andromeda. Logos lists three fields of application - midfield listening in control rooms, surround channels in Auro 3D, Dolby Atmos and DTS:X, and LCR surround monitoring in small-to-medium control rooms.

Key specs that matter

This is an active 2-way coaxial monitor. Its drive unit complement is a 254 mm LF bass unit and a 25 mm HF tweeter. Frequency response is 45 Hz - 20 kHz (-3 dB, 1 m full space, on-axis). Amplifier power per channel is 125 W rms for LF and 125 W rms for HF. Maximum continuous SPL and maximum peak SPL are both quoted as 110 dB at 1 m. Directivity is ±60 degrees horizontal and +50/-40 degrees vertical (-6 dB off axis at 10 kHz). Cabinet dimensions in portrait orientation are 300 x 300 x 300 mm (H x W x D), and each monitor weighs 12 kg.

Engineering and use context

Both drive units share one axis, with a separate amplifier channel for each. Input and output configuration is 2 in / 2 out. On the input side there are two balanced and two unbalanced analogue inputs plus a stereo AES-EBU digital input on XLR, with asynchronous sample rate conversion from 44.1 kHz to 216 kHz. Outputs are one wire-type speaker output and a stereo AES-EBU digital output on XLR. An RJ45 port gives access to a web interface over the network. Mains voltage is selectable between 110 and 240 V AC. Black and rosewood finishes are available.

Pairing

No external power amplifier is required. A source with balanced or unbalanced line outputs, or with an AES-EBU digital output on XLR, is required. The subwoofer in the same range is the SUB 12.

Alternatives

The NF-1 CX 6.5 is the nearfield monitor of the same range, with a 165 mm LF unit, a 34 mm tweeter and a response from 80 Hz.

Spezifikationen

  • Modellbezeichnung

    MF-1 CX 10

  • Untere Grenzfrequenz +/- 3dB (Hz)

    45

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    2 x 125

  • Größe (sm)

    30.0 x 30.0 x 30.0

  • Gewicht (kg)

    12

  • Offizieller Link

Weitere Komponenten