The Lumina II Amator is a passive two-way bookshelf loudspeaker that Sonus faber developed from the Lumina II, with an upgraded crossover and new front panels. Amator is the name Sonus faber has used for its special models. The Lumina II Amator was announced in 2023 and became available in Europe from December 2023 at USD 1,499 per pair, USD 200 more than the standard Lumina II. It is made at Sonus faber's factory in Vicenza, Italy.
Key specs that matter
System type is a 2-way shelf loudspeaker in a vented box. Drive units are a 29 mm DAD soft dome tweeter with a ferrite magnet and a 150 mm paper cone mid-woofer. Crossover point is 2.6 kHz, 800 Hz higher than in the Lumina II. Frequency response is 55 Hz - 24 kHz, sensitivity is 86 dB SPL (2.83 V/1 m) and nominal impedance is 4 ohms. Recommended amplifier power is 30 - 150 W (undistorted signal). Connection is by four binding posts (Hi, Mid-Low). Each speaker measures 304 x 180 x 263 mm (H x W x D) and weighs 5.8 kg, and a pair ships in a 435 x 380 x 490 mm carton weighing 14 kg.
Engineering and use context
Sonus faber states that the crossover design follows the development of its new Homage collection, and that many of its solutions are derived from the Amati G5 and Guarneri G5. It uses IFF circuitry and a phase-coherent approach, with Hi-Fi grade components. Its DAD (Damped Apex Dome) tweeter, also used in the Sonetto series, has a Kurtmueller hand-coated soft silk diaphragm and is visco-elastically decoupled from the baffle. The mid-woofer was developed for the Lumina collection and combines a custom-made basket with a diaphragm of cellulose pulp blended with other natural fibres. Chrome rings frame both drivers.
Outwardly the speaker keeps the squared Lumina cabinet, but the front panels are multilayer wood with a lacquered veneer whose woodgrain runs at 45 degrees. Sides and top are covered in black leather, and a rubber pad decouples the cabinet from its support. Finishes are Red, Wenge and Walnut, all in high gloss with black leather.
Pairing
An amplifier stable into 4 ohms is required. The two pairs of binding posts allow bi-wiring or bi-amping. In the same collection the Lumina V Amator is the floorstanding companion and the Gravis I is the subwoofer listed alongside it.
Alternatives
The Lumina II is the standard version of the same bookshelf speaker, with a 1.8 kHz crossover.