Hifiverse

Regallautsprecher - Sonus Faber LUMINA II

Beschreibung, Bilder, technische Daten und Spezifikationen

Sonus Faber LUMINA II
Bildquelle - (c) Sonus Faber

The Lumina II is a two-way bookshelf loudspeaker from Sonus faber's Lumina collection, the Italian company's entry range. Sonus faber lists it as the larger of the two bookshelf models in the collection, with a larger cabinet volume and a 150 mm mid-woofer. Lumina was launched on 8 September 2020, and the Lumina II followed in 2021 at USD 1,299 per pair. It is made in Italy, and Sonus faber also lists it for use as rear channels in a home theatre system.

Key specs that matter

System type is a 2-way shelf loudspeaker in a vented box. Its tweeter is a 29 mm DAD soft dome with a ferrite magnet, and the mid-woofer is a 150 mm cone driver. Crossover point is 1.8 kHz. Frequency response is 55 Hz - 24 kHz, sensitivity is 86 dB SPL (2.83 V/1 m) and nominal impedance is 4 ohms. Recommended amplifier power is 30 - 150 W (undistorted signal). Connection is by four binding posts (Hi, Mid-Low). Each speaker measures 304 x 180 x 263 mm (H x W x D) and weighs 5.8 kg, and a pair ships in a 435 x 380 x 490 mm carton with a packed weight of 14 kg.

Engineering and use context

DAD stands for Damped Apex Dome. This tweeter is the same unit used in the Sonetto collection and has a Kurtmueller hand-coated soft silk diaphragm, and it is visco-elastically decoupled from the baffle. Sonus faber developed the mid-woofer for the Lumina collection, with a custom-made basket and a diaphragm of cellulose pulp blended with other natural fibres. Chrome rings surround both drivers on the front baffle. According to Sonus faber, the crossover is designed for an optimised amplitude and phase response.

On the front of the cabinet is the reflex port. Inside the squared cabinet the front baffle is multilayer wood, finished in lacquer or wood veneer, while the sides and top are hand-covered in black leather. A rubber pad is the decoupling system under the cabinet. Three finishes are listed, all with black leather - Piano Black lacquer, Wenge with maple inlays and Walnut with maple inlays.

Pairing

An amplifier stable into 4 ohms is required. Two pairs of nickel-plated terminals allow bi-wiring or bi-amping. For multichannel systems the same collection includes the Lumina III floorstanding speaker and the Lumina CI centre channel.

Alternatives

The Lumina I is the smaller two-way passive bookshelf speaker of the same collection.

Spezifikationen

  • Modellbezeichnung

    LUMINA II

  • Untere Grenzfrequenz +/- 3dB (Hz)

    55

  • Obere Grenzfrequenz +/- 3dB (Hz)

    24 000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    30 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    30.4 x 18.0 x 26.3

  • Gewicht (kg)

    5.8

  • Offizieller Link