Wharfedale lists the Linton, a three-way speaker for stand mounting, in its Heritage Series, a range in which the British maker recreates well-known models from its past using current engineering and materials. The first Linton appeared in 1965 and was sold in several versions until the late 1970s as a serious hi-fi loudspeaker at a relatively modest price. The revived model went on sale at the end of May 2019, with proportions close to those of the classic original. At launch a pair cost GBP 999.95, the matching stands GBP 279.95, and speakers bought together with stands GBP 1,099.95.
Key specs that matter
Starting at the bottom, a 200 mm bass driver, its cone made of black woven Kevlar, hands over to a 135 mm Kevlar midrange at 630 Hz, and a 25 mm fabric dome tweeter takes over above 2.4 kHz. Frequency response runs from 40 Hz to 20 kHz within 3 dB, and the -6 dB point sits at 35 Hz. Wharfedale rates sensitivity at 90 dB for 2 V at 1 m, a lower drive voltage than the common 2.83 V reference, nominal impedance at 6 ohm and peak output at 110 dB. Each cabinet measures 565 mm high including its plinth, 300 mm wide and 330 mm deep, and weighs 18.4 kg.
Engineering and use context
Two reflex ports on the back panel load the bass unit. The bass unit is mounted on a rigid die-cast chassis, and the midrange driver works inside its own internal sub-enclosure. A high-flux ferrite magnet drives the tweeter dome. The cabinet is clad in hand-matched wood veneer, walnut or mahogany at launch, and Wharfedale pairs the vintage styling with a finish standard it describes as contemporary. The optional stands are 437 mm tall with the same 300 x 330 mm footprint as the speaker. They have a rigid metal frame meant to damp vibration, veneered top and bottom panels and an open section for storing vinyl records, and their height puts the drivers at a suitable level for a seated listener.
Pairing
Wharfedale allows a wide window of amplifier power, from 25 to 200 W, which takes in both small integrated amplifiers and powerful ones. The minimum impedance falls to 3.5 ohm, which favours an amplifier that remains stable and supplies current comfortably into low loads. The dedicated Linton stands complete the set and keep the period look of the cabinets.
Alternatives
Within the Heritage Series, the Wharfedale Denton 85 offers a two-way bookshelf alternative in a smaller cabinet that uses a 165 mm Kevlar cone bass driver.