The Bronze 100 is a two-way bookshelf loudspeaker from the sixth-generation Bronze series of Monitor Audio, the British company based in Rayleigh, Essex. Launched in 2020, the 6G Bronze range is the entry series of the brand, below Silver, Gold and Platinum. Monitor Audio presents the Bronze 100 as the continuation of the Bronze 50, with a larger cabinet and a new 203 mm C-CAM driver.
Key specs that matter
Drive units are one 203 mm C-CAM bass/mid-range driver and one 25 mm C-CAM Gold tweeter with UD waveguide, crossed over at 2.2 kHz. Frequency response is 52 Hz - 25 kHz free-field and 37 Hz - 30 kHz in-room (both -6 dB). Sensitivity is 87 dB (2.83 V/1 m). Impedance is 8 ohms nominal, 4.5 ohms minimum. Maximum SPL is 110 dBA (pair). Power handling is 100 W RMS, and recommended amplifier power is 30 - 100 W. Bass alignment is bass reflex with a HiVe II port. Dimensions are 376 x 231 x 325 mm (H x W x D, including grille and terminals), and each speaker weighs 7.8 kg.
Engineering and use context
Its tweeter is a development of the C-CAM Gold dome tweeter and sits behind a new UD (Uniform Dispersion) waveguide. C-CAM is also the cone material of the redesigned bass/mid-range driver, which has a revised chassis geometry and DCM (Damped Concentric Mode) technology. Monitor Audio uses Single Bolt Through driver mounting, quoting higher stiffness and stability and decoupling of the driver from the baffle. Like the Bronze 50, the Bronze 100 is rear-ported, with a HiVe II reflex port.
Cabinet walls are 15 mm MDF, combined with a painted 21 mm front baffle and internal bracing positioned against panel resonance. In the crossover, polyester film and electrolytic capacitors are combined with air-core inductors and low-loss laminated steel-core inductors. Internal wiring is oxygen-free, silver-plated Pureflow copper, and connection is through gold-plated bi-wire terminals. Magnetic grilles cover the drivers, and the tweeter has a hexagonal grille. Four finishes are offered - Black, White, Walnut and Urban Grey.
Pairing
An amplifier stable into 4 ohms is required. Its bi-wire terminals allow bi-wiring or passive bi-amping. The Bronze C150 centre, Bronze FX surround and Bronze W10 subwoofer are the matching home cinema models.
Alternatives
The Monitor Audio Bronze 50 is the compact two-way Bronze bookshelf model, with a 140 mm C-CAM bass/mid-range driver, 85 dB sensitivity and a weight of 5 kg.