Hifiverse

Regallautsprecher - Børresen Acoustics Børresen T1

Beschreibung, Bilder, technische Daten und Spezifikationen

Børresen Acoustics Børresen T1
Bildquelle - (c) Børresen Acoustics

The Børresen T1 is the two-way stand-mounted loudspeaker of the T-series from Børresen Acoustics, part of Audio Group Denmark. Børresen crafts the T-series in Denmark and states that it was heavily inspired by the M-series, using downscaled M-technologies. On sale since March 2025, the T-series succeeds the 0-series and also includes the floorstanding T3 and T5, with a Silver Supreme Edition version of each model. The standard T1 was announced at EUR 35,000 per pair and the Silver Supreme Edition at EUR 50,000.

Key specs that matter

Drive units are one Børresen RP94 ribbon planar tweeter and one 127 mm Børresen IronFree5 bass/midrange driver. Frequency response is 40 Hz - 50 kHz. Sensitivity is 85 dB/1 W and impedance is 6 ohms. Recommended amplifier power is more than 50 W. Dimensions are 454 x 200 x 475 mm (H x W x D), and the matching stand measures 716 x 296 x 462 mm. Finishes are black high-gloss lacquer or walnut real wood veneer in high-gloss lacquer.

Engineering and use context

In the patented ironless IronFree5 motor, four N52 neodymium rings in a mirrored alignment replace the conventional iron-core design. Because the two magnet pairs repel each other, one external and one internal non-magnetic copper ring sit between them. These in-house cast rings keep the motor cylindrical with a uniform gap width, dissipate heat and resist changes in magnetic flux.

Its membrane has three layers laminated into a single unit - an aramid honeycomb core between two spread tow carbon fibre skins. Graphene and boron whiskers are mixed into the epoxy resin that binds the layers.

According to Børresen, the RP94 is a closed ribbon tweeter with an efficiency of 94 dB, a moving mass of 0.01 g and no transformer, and it operates from approximately 2.5 kHz upwards. Finite element methods were used to linearise its magnetic flux field.

Each T1 has a serial crossover, so both drivers share the same current flow in the crossover region. Coils are foil types wound with paper isolation and impregnated with resin under vacuum. Capacitors are arrays of small military-spec stacked-foil types, and the tweeter attenuation resistors are metal strip types. Internal wiring is Ansuz Gold Signature. In the T-series, cryogenic treatment covers the copper and silver rings, internal wiring, baskets, crossover coils and the tweeter. The cabinet uses thick block-milled hardwood braces and carbon fibre reinforcements, and a rear venting system allows the drivers to decompress.

Pairing

An amplifier meeting the recommended power rating is required. Audio Group Denmark lists the Aavik I-880 integrated amplifier alongside the T1.

Alternatives

The Børresen M1 is the stand-mounted model of the M-series, the range whose technologies the T-series uses in downscaled form.

Spezifikationen

  • Modellbezeichnung

    Børresen T1

  • Untere Grenzfrequenz +/- 3dB (Hz)

    40

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Empfindlichkeit (dB at 1 W/1m)

    85

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    45,4 x 20 x 47,5

  • Gewicht (kg)

    N/A

  • Offizieller Link