The BB6-A is a three-way active reference monitor with ATL bass loading in the Main Monitor series of PMC, based in Biggleswade, England. It succeeds the BB5, a design PMC credits with 25 years of service, and keeps its frequency response, 380 mm Radial bass driver and maximum SPL while adding PMC's own Class-D amplification and DSP control. PMC lists it for larger recording, mixing, mastering and outside broadcast facilities, as a free-standing tower or mounted in soffits.
Key specs that matter
Drive units are a PMC 380 mm Radial driver for LF, a PMC hand-built 75 mm soft-dome driver for MF and a PMC 34 mm soft-dome tweeter with acoustic radiator for HF. Crossover frequencies are 380 Hz and 3.8 kHz. Usable frequency response is 17 Hz - 25 kHz, maximum SPL is 128 dB at 1 m and effective ATL length is 4 m. Amplifier power per channel totals 3225 W - LF 1 x 2400 W rms, MF 1 x 550 W rms and HF 1 x 275 W rms. Inputs are balanced analogue and AES3 digital at 24-bit, with analogue input sensitivity adjustable from +4 to +20 dBu and 20 kOhm balanced input impedance. Each cabinet measures 1040 x 432 x 790 mm (H x W x D) and weighs 73 kg.
Engineering and use context
Every channel has its own Control 1200 and Power 2400 amplifier, and each amplifier module has a linear, highly filtered power supply. The DSP provides a 24 dB per octave crossover, optimises driver response and dispersion, and adds non-invasive protection through modelled excursion limiting. Its Radial bass driver uses an ultra-rigid, low-mass PMC cone in a custom Radial basket that conducts heat away from the voice coil and vents hot air through the back of the driver assembly. Each hand-built 75 mm midrange dome takes seven days to produce. In front of the tweeter a perforated acoustic lens extends the treble response and controls dispersion for integration with the midrange.
Cabinets are of highly braced, resonance-damped Medite, with offset HF and MF drivers, radiused edges and absorbent StealthBaffles at the boundaries. According to PMC, soffit mounting is not essential because the ATL bass response is sufficient without the LF gain of a soffit, and subwoofers are not required since the BB6-A covers the 20-60 Hz range. Dedicated PointOne LFE inputs are included for multichannel content. A wired RJ45 desktop remote with backlit display and jog wheel is supplied as standard, giving volume from -48.5 to +15 dB and access to four presets.
Pairing
A source or console with an AES3 output or a balanced analogue line output is required. The matching centre speaker is the BB6-C-A.
Alternatives
The PMC MB3-A is the smaller three-way active main monitor, with a 310 mm Radial bass driver, a 3 m effective ATL and 126 dB maximum SPL.