The genuin audio ava is a fully active, DSP-controlled three-way loudspeaker in bookshelf format, made in Germany. genuin audio describes it as the bookshelf version of its neo floorstanding speaker, based on the same principles in a cabinet half as tall. The company is run by Thomas Wendt, and the ava was shown in Munich as part of a complete genuin system at EUR 19,500 per pair.
Key specs that matter
Drive units are a coaxial driver with a 165 mm midrange and a 25 mm tweeter on the front baffle and a 200 mm long-excursion woofer with a 50 mm voice coil on the side panel. Crossover frequencies are 170 Hz and 2 kHz, with a 35 Hz high-pass filter. A 32-bit DSP with linear-phase FIR filter design controls the system, and amplification is a four-channel UMAC Class D module rated at 1,000 W maximum per speaker. Lower cut-off frequency is 33 Hz (-6 dB), and the coaxial driver has a sensitivity of 93 dB/1 m. Inputs are one balanced XLR analogue input and one AES/EBU digital input on XLR. Each cabinet measures 557 x 256 x 437 mm (H x W x D, without spikes) and weighs 26.6 kg.
Engineering and use context
In the ava the DSP assigns the woofer, midrange and tweeter their frequency ranges and replaces an analogue crossover. Besides IIR filtering it uses linear-phase FIR filtering, developed by its design team since the 1980s. Every driver is measured individually and the DSP is programmed from those results, with the aim of a constant propagation speed for all frequency components. genuin audio specifies a linear phase response over 60 Hz - 20 kHz.
Both drivers come from the professional sector, and the woofer withstands up to 700 W. A Look-Ahead analysis in the DSP protects drivers and amplifiers against overload. Its amplifier module comes from Pascal Audio and has no fan. Two channels drive the woofer in bridge mode, while the midrange and tweeter of the coaxial driver have one channel each.
Analogue signals are digitised by two 24-bit converters working as a dual-range AD converter with 128 dB dynamic range. With a digital source the signal stays in the digital domain until conversion for the individual amplifier channels. Cabinet walls are 19-54 mm MDF boards, grooved and internally ribbed, with a flow-optimised reflex tunnel on the back. A three-dimensional edge geometry of the front section is diffraction-optimised for the mid-high range.
Pairing
A source with a balanced XLR line output or an AES/EBU digital output is required. No external power amplifier is needed. The matching digital source is the genuin audio tars music server.
Alternatives
genuin audio makes no other bookshelf loudspeaker.