The Aurora 200 P is the active version of the compact two-way shelf speaker in the Aurora series from HECO of Germany. It is a stereo set of one active and one passive speaker, and the right-hand active speaker carries the Class D amplifier, the controls and all inputs. HECO names three uses - hi-fi shelf speaker, TV sound extension and desktop monitor. RRP was EUR 699 per set, and the Black Edition cabinet has a high-gloss front panel.
Key specs that matter
Principle is 2-way bass reflex, active. Each speaker has a 125 mm woofer-midrange with a kraft paper cone and a 28 mm Fluktus tweeter with a silk compound dome, with the crossover frequency at 3.4 kHz. Output power (RMS/max.) is 2 x 35 W / 2 x 70 W. Frequency response is 38 Hz - 40 kHz. Input impedance is 100 kOhm at the AUX input and 20 kOhm at the LINE/PHONO input. On the rear of the active speaker are an RCA input with a PHONO/LINE switch for MM cartridges, a 3.5 mm AUX IN jack, an optical digital input for stereo signals up to 24 bit/192 kHz, an HDMI (ARC) input, a GND earth terminal and a SUB OUT for an active subwoofer. Bluetooth 5.0 with Qualcomm aptX is built in. Mains voltage is 100 - 240 V, 50 - 60 Hz. The active speaker measures 170 x 308 x 258 mm (W x H x D) and weighs 5.8 kg, the passive one 170 x 308 x 245 mm and 5.2 kg.
Engineering and use context
At the centre of the Fluktus tweeter's wavy front panel sits the 28 mm fabric dome. It has ferrofluid cooling and a ferrite double magnet system, and HECO states that the flange geometry gives a balanced dispersion. Its partner, the woofer-midrange, has a long-throw surround, a heavy-duty voice coil and a flat long-fibre dust cap, and is mounted in a coated steel basket with a trim ring secured by six screws. HECO specifies a phase and amplitude optimised crossover. Both drivers are housed in an MDF cabinet with a flow-optimised, screwed bass reflex port.
Over HDMI ARC (HDMI 1.4 standard) the set receives the audio of a TV, and with CEC the TV remote switches it on and off and sets volume and mute. A supplied remote control selects the source and sets BASS and TREBLE, and its LINEAR button resets both controls. A coloured LED shows the active input and the Bluetooth status. Auto Standby switches the set off after about 60 minutes without a signal and can be deactivated. A 3 m speaker cable, the mains cable, rubber spikes and a cloth cover with hidden magnetic fastening are included.
Pairing
A turntable with an MM cartridge connects directly to the RCA input in PHONO mode. The SUB OUT accepts an active subwoofer. HDMI operation requires a TV with an ARC-capable HDMI socket.
Alternatives
The HECO Ascada 2.0 is another active stereo speaker set in the HECO range.