Hifiverse

Regallautsprecher - Sonner Audio ALLEGRO UNUM MKII

Beschreibung, Bilder, technische Daten und Spezifikationen

Sonner Audio ALLEGRO UNUM MKII
Bildquelle - (c) Sonner Audio

The Allegro Unum MKII is a two-way stand-mount loudspeaker in the Allegro Reference series of Sonner Audio, a company from Merrimack, New Hampshire, led by president Gunawan Surya. Sonner was set up in 2015 by two partners with industrial and electrical engineering backgrounds. A Signature Edition of the Allegro Unum MKII is also offered.

Key specs that matter

It is a two-way stand-mount with a ported box. Its drivers are a 25 mm ring dome diaphragm tweeter and a 152 mm custom design magnesium cone woofer. Crossover point is 2 kHz. Frequency range is 43 Hz - 23 kHz. Nominal impedance is 8 ohms (min. 5.5 ohms). Recommended power amplifier is 3 W to 250 W, and recommended stand height is 660 mm. Finishes are black gloss, white gloss and gloss rosewood.

Engineering and use context

Sonner makes the cabinet as a one-piece molded curve shell. Layers of selected wood are molded in a proprietary process into a monocoque, and the curved, non-parallel shape reduces internal standing waves and resonance. An aluminium front baffle is used, and the cabinet leans back at an angle with an acoustic plate on the front baffle for time alignment. According to Sonner, this angle frees the crossover from electrical time domain compensation. Its port has a proprietary outer surface shaped to the outer radius of the curved shell.

In the woofer the cone is a magnesium aluminium alloy with a density of 1.9 g/cm3, and the driver is built to Sonner's specification. It has a large magnet, a long voice coil for large cone excursion and a reinforced rubber surround with a radial pattern. A heavy copper ring mounted in the magnet poles reduces non-linearity and intermodulation distortion. Its molded metal frame has large openings above and below the spider against backward air flow and cavity resonance.

Sonner calls the crossover Symmetrical Panoramic Design, part of its Panoramic Crossover Technology. It controls the frequency response, impedance variation and phase behaviour of each driver, and its phase is set by computer modelling together with the cabinet angle. Components are selected to tight tolerances and connected point to point without a printed circuit board. Every crossover is measured against the theoretical design and then potted in epoxy compound to reduce microscopic vibration of the components. Magnetic faceplates in Blue Lagoon, Buckskin, Chestnut, Gloss Black, Orange Spice, Red Poppy and White Pearl are sold as accessories.

Pairing

A stereo amplifier within Sonner's recommended power range is required. Sonner specifies low, flat impedance variation as a key element of its crossover design.

Alternatives

The Sonner Audio Legato Unum is the two-way stand-mount of the Legato series, with a 140 mm coated paper cone mid woofer and 87.5 dB sensitivity.

Spezifikationen

  • Modellbezeichnung

    ALLEGRO UNUM MKII

  • Untere Grenzfrequenz +/- 3dB (Hz)

    43

  • Obere Grenzfrequenz +/- 3dB (Hz)

    23 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    3 - 250

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    ~31 x 20 x 46

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten