Hifiverse

Regallautsprecher - B&W (Bowers & Wilkins) 805 D4 Signature

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) 805 D4 Signature
Bildquelle - (c) B&W (Bowers & Wilkins)

The 805 D4 Signature is a stand-mount loudspeaker from Bowers & Wilkins and a special edition of the standard 805 D4. It belongs to the 800 Series Diamond, the top loudspeaker range of the British company, and forms the 800 Series Signature line together with the 801 D4 Signature. The US price is USD 14,000 per pair.

Key specs that matter

This is a 2-way vented-box system with a 25 mm Diamond Dome high-frequency unit and a 165 mm Continuum cone bass/midrange driver. Frequency response is 42 Hz - 28 kHz (±3 dB), and frequency range is 34 Hz - 35 kHz (-6 dB). Sensitivity is 88 dB SPL (2.83 Vrms, 1 m). Nominal impedance is 8 ohms (min. 4.6 ohms). Second and third harmonic distortion (90 dB, 1 m on axis) is below 1% from 90 Hz to 20 kHz and below 0.3% from 120 Hz to 20 kHz. Recommended amplifier power is 50 - 120 W into 8 ohms on unclipped programme, and maximum recommended cable impedance is 0.1 ohm. Each speaker measures 440 x 240 x 373 mm (H x W x D) and weighs 15.55 kg.

Engineering and use context

Signature changes start with the crossover. B&W uses an upgraded rear-mounted crossover design mounted on stiff aluminium spines, and this layout isolates the capacitors from the effects of air pressure within the enclosure. Above the cabinet, the Solid Body Tweeter-on-Top housing has an elongated form with a longer tube-loading system and an all-new tweeter grille.

Its Diamond Dome tweeter combines low mass with high stiffness. Below it, the Continuum cone has a composite construction that, according to B&W, avoids the abrupt transitions in behaviour of conventional cones. The model also uses Matrix, the Anti-Resonance plug and the Flowport.

Two cabinet finishes are offered, California Burl Gloss and Midnight Blue Metallic, both with a black grille.

Pairing

An amplifier within B&W's recommended power range is required. Speaker cable within B&W's maximum cable impedance is required.

Alternatives

The standard 805 D4 is the stand-mount model of the 800 Series Diamond with the same driver complement.

Spezifikationen