Hifiverse

Regallautsprecher - Linn 119

Beschreibung, Bilder, technische Daten und Spezifikationen

Linn 119
Bildquelle - (c) Linn

The 119 is a 2-way passive bookshelf loudspeaker from Linn, the Scottish company known for the Sondek LP12 turntable and its network music players. Linn introduced it in September 2024 and draws on the development of its 360 loudspeaker. The 119 can run passively from a conventional amplifier or be converted to Linn's Exakt system with a Selekt DSM or an Exaktbox. US price starts at USD 3,550 per pair.

Key specs that matter

Its tweeter is a 19.55 mm soft Sonomex dome with a large ferrite magnet and a voice coil in ferrofluid. Bass comes from a 160 mm Nextel-coated paper diaphragm on a large ferrite magnet motor system with high linear excursion. Operating volume is 9 litres, and the bass system is rear-ported. Nominal impedance is 4 ohms, and sensitivity is 86 dB. Frequency response is 50 Hz to above 20 kHz (±3 dB). Each speaker measures 328 x 191 x 241 mm (H x W x D) and weighs 7.15 kg. Finishes are walnut, oak, satin black and satin white.

Engineering and use context

As on the 360, the drive units are mounted flush with the front of the cabinet and there is no grille. Linn states that this minimises obstruction of the sound waves and improves driver movement. The analogue passive crossover is a lower-order design. A magnet-mounted drive unit trim with fine etched arcs, modelled on the surface of a vinyl record, and an electro-formed Linn logo tweeter guard are also taken from the 360.

Exakt is the upgrade path. Inside the 119 the passive crossover can be bypassed in a couple of minutes. A Selekt DSM can then hold the four channels of amplification, the DAC modules and the Exakt digital crossover, and only speaker cables are added to complete the system. With a Selekt DSM Classic Hub the system goes from passive to Exakt by adding internal amplification, and DAC modules can be upgraded over time. Further bass augmentation is available when the 119 is used with a Linn network music player.

Optional pedestal stands in black or silver mild steel measure 570 x 246 x 316 mm (H x W x D).

Pairing

An amplifier stable into 4 ohms is required in passive form. Two pairs of binding posts allow bi-wiring or passive bi-amping. The matching source and amplifier is the Linn Selekt DSM.

Alternatives

The 343 is Linn's compact reference loudspeaker.

Spezifikationen

  • Modellbezeichnung

    119

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    19.1 × 32.8 × 24.1

  • Gewicht (kg)

    7.15

  • Offizieller Link