Hifiverse

Kopfhörer - Focal Utopia Headphones

Beschreibung, Bilder, technische Daten und Spezifikationen

Focal Utopia Headphones
Bildquelle - (c) Focal

The Utopia is an open-back headphone from Focal, described here in its current version. It comes in a black leatherette box with a carrying case of 240 x 250 x 120 mm, and a stand is available as an option.

Key specs that matter

Each earcup carries a 40 mm full-range dynamic driver with a pure beryllium M-shaped dome. Frequency response is 5 Hz - 23 kHz (±3 dB). Harmonic distortion is below 0.2% (1 kHz, 100 dB SPL), impedance is 80 ohms, and maximum SPL is 104 dB SPL (peak at 1 m). Weight is 490 g. Two cables come with the headphone, a 1.5 m cable with a 3.5 mm jack and a 3 m cable with a 4-pin XLR plug, both terminated in Lemo connectors at the earcups, plus an adapter from a 3.5 mm socket to a 6.35 mm plug.

Engineering and use context

These patented drivers are fully open-back. According to Focal, they operate without active or passive correction, from 5 Hz to over 50 kHz. For the current model the voice coil is made from two materials, copper for reliability and aluminium for lightness.

In front of each driver, the grilles are also M-shaped and follow the shape of the dome. The yoke is made of recycled forged carbon to keep the weight down, while memory ear pads and a genuine leather headband are used for comfort. Focal specifies a running-in period of at least 24 hours of playback at a relatively high level.

Pairing

A headphone amplifier with a balanced 4-pin XLR output connects through the supplied XLR cable. Single-ended 3.5 mm and 6.35 mm outputs use the 3.5 mm cable and the adapter.

Alternatives

The Clear MG is the open-back headphone below the Utopia in Focal's range.

Spezifikationen

  • Modellbezeichnung

    Utopia Headphones

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Open

  • Tragestil

    Over-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    5

  • Obere Grenzfrequenz +/- 10dB (Hz)

    50000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    1 x 1.5 m cable with 3.5 mm) asymmetric TRS Jack and 2 x Lemo connectors, 1 x 4-point XLR connector and 2 Lemo connectors and 1 x Jack adapter, 3.5 mm - 6.35 mm point plug

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    104

  • Impedanz (Ohm (1 kHz))

    80

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link