Hifiverse

Kopfhörer - Letshuoer Soloist

Beschreibung, Bilder, technische Daten und Spezifikationen

Letshuoer Soloist
Bildquelle - (c) Letshuoer

Soloist is a single-driver in-ear monitor from Letshuoer, an earphone company based in China. It was launched in May 2020 under the earlier Shuoer name at USD 159.99 and is now listed under the Letshuoer brand. Two colour versions were offered, blue and orange, each with a black body and a patterned faceplate in that colour, and the blue faceplate carries wave-like streaks. Its driver is the one Shuoer also used in the Conductor, where it works alongside other drivers, while the Soloist uses it on its own.

Key specs that matter

A dynamic driver with a Kevlar dome is used, with a membrane 0.03 mm thick and a liquid silicone surround. Rated impedance is 32 ohms ±2 ohms, and sensitivity is 105 dB ±1 dB. Frequency range is 20 Hz - 30 kHz, with THD+N of 0.5% ±0.2%. Each earpiece has standard 0.78 mm two-pin sockets. Its cable is made of 6N OCC copper (oxygen-free copper produced by the Ohno continuous casting process) in a nylon braid.

Engineering and use context

With one driver per side, the shell contains no crossover network. Both housings are 3D printed from imported resin, and the stated manufacturing tolerance is ±0.02%. Shuoer shaped the body to follow the outer ear for long wearing sessions. Kevlar is an aramid fibre, and the maker chose it as the dome material for the single dynamic driver. In place of the thin plastic film usually used as a surround in small drivers, the dome is suspended in soft liquid silicone. Aftermarket cables with 0.78 mm two-pin plugs can replace the stock lead. Its nylon-braided lead is light and stays flexible when coiled for storage in the supplied case.

Pairing

The stock cable ends in a 2.5 mm balanced plug for players and DAC amplifiers with a matching output. Two short adapters in the box convert it to a 3.5 mm single-ended plug or to a 4.4 mm balanced plug. Six pairs of silicone tips, two pairs of foam tips and a carry case complete the accessory kit.

Alternatives

The Letshuoer S12 is the brand's in-ear model with a 14.8 mm planar magnetic driver instead of the dynamic Kevlar unit.

Spezifikationen

  • Modellbezeichnung

    Soloist

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    In-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 10dB (Hz)

    N/A

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    2-pin 0.78 mm; 2.5 mm cable + 3.5/4.4 mm adapters

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedanz (Ohm (1 kHz))

    N/A

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link