Hifiverse

Kopfhörer - Grado Labs Signature S950

Beschreibung, Bilder, technische Daten und Spezifikationen

Grado Labs Signature S950
Bildquelle - (c) Grado Labs

The Signature S950 is an open-back dynamic headphone from Grado Labs, the company founded on a kitchen table in 1953 that hand-assembles its headphones in Brooklyn, New York. It is the second headphone of the Signature line, after the machined-aluminium Signature HP100 SE, and its housings are made of Brazilian Walnut, the first time Grado has used this family of woods. In its standard configuration with a 1.8 m cable and a 6.3 mm plug, the S950 lists at USD 2,195.

Key specs that matter

Transducer type is dynamic, with a 52 mm driver, and the operating principle is open air. Frequency response is 3.5 Hz - 51.5 kHz. THD is below 0.1% at 100 dB. SPL at 1 mW is 117 dB and nominal impedance is 38 ohms. Drivers are matched to within 0.4 dB. Weight is 395 g. A detachable Grado Signature Gold cable with a 4-pin mini XLR headphone connection and a 6.3 mm source connection is standard.

Engineering and use context

Grado uses a version of the new 52 mm S driver originally designed for the HP100 SE. It has a paper composite cone, a high-flux magnetic circuit made from rare earth alloys and a lightweight copper-plated aluminium voice coil.

Each Brazilian Walnut housing is crafted individually, so the wood grain is never identical from one pair to another. Grado chose walnut for its density and resistance to decay. Its low expansion and contraction with changes in temperature or humidity helps maintain the acoustical characteristics of the housing. Grado has been working with wood for over a quarter of a century.

On top is the headband assembly first used on the HP100 SE, with 50% more padding than earlier Grado models, a stainless-steel band and adjustable height rods. Engraved gimbals are made of aluminium alloy, and a stainless-steel height rod adds stability at the connection point. That rod stays in place if the zinc alloy end caps become dislodged and restricts housing rotation to 105 degrees to minimise wear.

Its Signature Gold cable has a softer braided finish and improved insulation and lower weight, and it plugs into each housing through a 4-pin balanced mini XLR connector. Grado also offers a 3.7 m length and 4.4 mm balanced or 4-pin balanced XLR terminations. Both G Cushions and F Cushions are supplied.

Pairing

A headphone output with a 6.3 mm socket is required for the standard cable. Balanced amplifiers connect through the optional 4.4 mm or 4-pin XLR cable.

Alternatives

Grado's Signature S750 is another open-back headphone in the same Signature line.

Spezifikationen

  • Modellbezeichnung

    Signature S950

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Open

  • Tragestil

    Over-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    3.5

  • Obere Grenzfrequenz +/- 10dB (Hz)

    51500

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    117

  • Verbindungsart

    Wired

  • Anschluss (mm)

    6.3 mm

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    115

  • Impedanz (Ohm (1 kHz))

    38

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link