Hifiverse

Kopfhörer - OLLO Audio OLLO R1

Beschreibung, Bilder, technische Daten und Spezifikationen

OLLO Audio OLLO R1
Bildquelle - (c) OLLO Audio

The R1 is a closed-back over-ear recording headphone from OLLO Audio, a Slovenian company that builds its headphones to be serviced at home. OLLO lists vocals, instruments, field recordings, podcasts, AV productions and sound design as its applications, while its open-back models are intended for mixing. The price is EUR 399, or USD 384, and units bought directly from OLLO come with a 90-day trial and a 5-year limited warranty.

Key specs that matter

Under EN 60268-7 it is classified as a circumaural closed-back dynamic headphone. Each cup has a 50 mm dynamic neodymium driver with a composite PU+PET membrane in a patented pattern. Impedance is about 32 ohms. Sensitivity is 110 dB SPL at 1 kHz with 0 dBu input. Frequency range is 5 Hz - 22 kHz (sweep, 1/3 octave, 13.4 dB SPL peak-to-peak range, ±1 dB). THD is below 0.12% and second harmonic below 0.05% (94 dB SPL, 1 kHz, IEC 60318-1 ear simulator). Left and right drivers are matched to ±1 dB SPL from 100 Hz to 10 kHz. Weight is 386 g without cable.

Engineering and use context

Passive isolation measured with pink noise is 5 dB at 250 Hz, 11 dB at 500 Hz, 13 dB at 1 kHz, 25 dB at 3 kHz and over 30 dB above 6 kHz, an average of about 10 dB SPL(c). This isolation is bidirectional, and OLLO states that the closed back halves the headphone mix leaking into a nearby microphone. Its tuning is a U-shaped frequency response, chosen for performers during takes, and unit-specific calibration is not offered on this model. Air pressure equalisation is controlled with a Saati flow resistor.

Earpads have a 100 mm outer and 60 mm inner diameter and a depth of 25 mm, with acoustic foam under an artificial leather cover, and they are exchanged without tools. Cups of American walnut rotate and tilt. A powder-coated stainless spring steel band carries a self-adjusting strap, and clamping force is set to reach the target response on a KEMAR head of 14.3 cm bitragional width. Driver, earpads, headband, strap and cable are all replaceable with home tools.

Pairing

The detachable 2 m silicone cable has an enamelled OFC core and dual mini XLR plugs for the left and right channels. It ends in a 3.5 mm jack with a screw-on 6.3 mm adapter. Audio interfaces, mixing desks, headphone amplifiers and portable devices can drive it directly.

Alternatives

The OLLO X1 is the open-back mixing headphone of the range and is supplied with unit-specific calibration.

Spezifikationen

  • Modellbezeichnung

    R1

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    Over-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    5

  • Obere Grenzfrequenz +/- 10dB (Hz)

    22 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    Mini XLR, 3.5mm

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    110

  • Impedanz (Ohm (1 kHz))

    32

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    386

  • Offizieller Link