Hifiverse

Kopfhörer - Binary Acoustics EP321

Beschreibung, Bilder, technische Daten und Spezifikationen

Binary Acoustics EP321
Bildquelle - (c) Binary Acoustics

The EP321 is a universal-fit in-ear monitor from Binary Acoustics, a Chinese company that also trades as Binary Audio and first built its name with the Chopin hybrid made together with Gizaudio. Binary describes the EP321 as the world's first IEM with Direct Drive MEMS technology. The launch price was USD 309.99, with the same price for the 3.5 mm and 4.4 mm versions.

Key specs that matter

Each side carries a six-driver tribrid configuration - a 10 mm dynamic driver, a 6 mm passive diaphragm, three balanced armature drivers and one Direct Drive MEMS driver. Frequency response is 8 Hz - 40 kHz. Impedance is 13 ohms at 1 kHz, and sensitivity is 122 dB/Vrms. THD+N is below 1%. Each earpiece weighs 7.5 g. Its cable is detachable, with standard 0.78 mm 2-pin connectors, and the termination is chosen at purchase - a 3.5 mm single-ended or a 4.4 mm balanced plug.

Engineering and use context

Binary arranges the drivers in a three-way crossover. The dual dynamic section, made up of the 10 mm dynamic driver and the 6 mm passive radiator, covers the bass. Among the armatures, one full-frequency BA driver covers the midrange, and a composite dual BA unit covers the high-frequency band. At the top, the MEMS driver is implemented for the ultra-high-frequency band.

According to Binary, MEMS drivers usually require an additional amplifier. In the EP321 a built-in energizer powers the Direct Drive MEMS driver, so no additional amplifier is required.

Housings are 3D printed from resin in an ergonomic shape. On the outside are CNC-machined stainless steel face panels with an irregular geometric pattern that reflects different colours at different light angles. Stock ear tips come with the earphones.

Pairing

A 3.5 mm single-ended or a 4.4 mm balanced headphone output is required, matching the plug chosen at purchase. No separate amplifier is required for the MEMS driver. The 0.78 mm 2-pin sockets accept aftermarket cables.

Alternatives

The Binary Chopin is a hybrid in-ear from the same company, with one dynamic driver and three balanced armatures.

Spezifikationen

  • Modellbezeichnung

    EP321

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    In-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    8

  • Obere Grenzfrequenz +/- 10dB (Hz)

    40 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    3.5mm/4.4mm

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    122

  • Impedanz (Ohm (1 kHz))

    13

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    7.5

  • Offizieller Link