Hifiverse

Kopfhörer - JBL ENDURANCE SPRINT

Beschreibung, Bilder, technische Daten und Spezifikationen

JBL ENDURANCE SPRINT
Bildquelle - (c) JBL

The Endurance Sprint is a Bluetooth sport earphone in JBL's Endurance line. JBL lists it as waterproof wireless in-ear sport headphones, so it is a wireless in-ear model rather than a true wireless one with a charging case. It dates from 2018 and was offered in black, blue, red, teal and black with yellow.

Key specs that matter

Each earpiece has a 10 mm dynamic driver. Frequency response is 20 Hz - 20 kHz, impedance is 16 ohms, signal-to-noise ratio is 85 dB, and maximum SPL is 102 dB SPL (1 kHz). Microphone sensitivity is -20 dBFS/Pa (1 kHz). Battery type is lithium-ion polymer, 3.7 V and 120 mAh. Playback time and talk time with Bluetooth on are both 8 hours, and charging time is 2 hours. A 10-minute charge gives one hour of use. Water protection is IPX7, with a rating for 30 minutes at a depth of 1 m. The Bluetooth 4.2 radio transmits in the 2.402 - 2.48 GHz band at a maximum of 4 dBm, with GFSK, pi/4 DQPSK and 8DPSK modulation.

Engineering and use context

According to JBL, the IPX7 rating covers use in all weather and sport conditions. Fit relies on three JBL features. TwistLock and FlexSoft technologies keep the housings lightweight and ergonomic for comfort and stability during any exercise, and JBL backs them with its never hurt, never fall out promise. MagHook is the third element - a hook that holds the earphones securely during a workout. Its magnetic catch also lets the two earpieces be joined and clipped to a shirt or around a backpack strap when not in use.

Touch controls on the earpieces start and pause playback, change the volume and skip tracks, and they also manage calls. Hands-free calling runs over the Bluetooth link through the built-in microphone. In the box are the earphones, three sizes of ear tips, a charging cable, one extra fit wing, the warranty card, a safety card and the quick start guide.

Pairing

A smartphone, tablet or laptop with Bluetooth is required as the source. Supported profiles are HFP 1.6 for calls, A2DP 1.3 for stereo audio and AVRCP 1.5 for remote control of the player. No separate DAC or headphone amplifier is used.

Alternatives

The Endurance Run 2 Wireless is a later JBL wireless sport earphone with the FlipHook design, an IPX5 rating and a 10-hour battery.

Spezifikationen

  • Modellbezeichnung

    ENDURANCE SPRINT

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    TWS

  • Untere Grenzfrequenz +/- 10dB (Hz)

    20

  • Obere Grenzfrequenz +/- 10dB (Hz)

    20 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    N/A

  • Impedanz (Ohm (1 kHz))

    16

  • Wiedergabedauer (hours)

    up to 8

  • Gewicht (g)

    N/A

  • Offizieller Link