Hifiverse

Kopfhörer - Koss BT115i Bluetooth

Beschreibung, Bilder, technische Daten und Spezifikationen

Koss BT115i Bluetooth
Bildquelle - (c) Koss

The BT115i is a wireless Bluetooth in-ear headphone from Koss Corporation of Milwaukee, Wisconsin, the company John C. Koss founded in 1953. Released in 2019, it is one of the entry-level Bluetooth models in the Koss range, and Koss lists it at USD 29.99. Its two earbuds are joined by a cable that carries the in-line microphone and remote, and the headphone is intended for listening and calls with a phone, tablet or computer.

Key specs that matter

Frequency response is 18 - 20,000 Hz, and sensitivity is 110 dB SPL. Connection is by Bluetooth version 5.2. Koss rates battery life at 18+ hours, and the built-in Li-ion polymer battery is rated 3.7 V, 100 mAh. Charging is by USB-C, with an input rating of 5 V, 50 mA. The earbuds are sweat resistant. Small, medium and large cushions and a cable management clip are included, and the BT115i is covered by a 1-year limited warranty.

Engineering and use context

All controls sit on the three-button in-line remote. A single press of the centre button starts or pauses playback and answers or ends a call, and a long press switches the headphone on or off. The plus button raises the volume in steps with a single press and skips to the next track with a long press, and the minus button lowers the volume and returns to the previous track in the same way. To enter Bluetooth discovery mode, the centre button is held from the off state until the indicator light flashes red and blue.

An indicator light on the remote shows the operating state. Blue flashing means paired, red solid means charging and blue solid means fully charged, and red flashing signals a low battery. The USB charging port is on the remote housing.

Its radio operates in the 2402 - 2480 MHz band on 79 channels to the 802.15.1 standard, with a maximum RF output power of 2.24 dBm (EIRP). Koss specifies an operating temperature range of -10 to 45 °C for use and charging. The headphone is made in China.

Pairing

A source with Bluetooth audio is required. A USB port of version 2.0 or higher or a USB power adapter is required for charging. The in-line microphone allows hands-free calls with a paired phone.

Alternatives

The Koss BT232i is a Bluetooth in-ear model with the SportClip ear-clip design.

Spezifikationen

  • Modellbezeichnung

    BT115i Bluetooth

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    In-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    18

  • Obere Grenzfrequenz +/- 10dB (Hz)

    20 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    110

  • Impedanz (Ohm (1 kHz))

    N/A

  • Wiedergabedauer (hours)

    6

  • Gewicht (g)

    N/A

  • Offizieller Link