Hifiverse

Kopfhörer - Audio-Technica ATH-M50xBT2

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica ATH-M50xBT2
Bildquelle - (c) Audio-Technica

The ATH-M50xBT2 is the second-generation wireless version of the ATH-M50x studio monitor headphone from Audio-Technica of Japan. It is a closed-back, over-ear dynamic design that arrived about two years after the first ATH-M50xBT. Audio-Technica announced it in August 2021, with a launch price of GBP 179.99 or EUR 199, and Japanese sales began on 24 September 2021.

Key specs that matter

A proprietary 45 mm large-aperture driver sits in each earcup. Sensitivity is 99 dB/mW, impedance is 38 ohms and frequency response is 15 Hz - 28 kHz. Bluetooth 5.0 carries the A2DP, AVRCP, HFP and HSP profiles with LDAC, AAC and SBC codecs, and range is up to 10 m in line of sight. With LDAC at 96 kHz and 990 kbps the transmission band is 20 Hz - 40 kHz, against 20 Hz - 20 kHz at 44.1 kHz. A 3.7 V lithium polymer battery gives up to about 50 hours of playback and charges in about 3.5 hours, and 10 minutes of charging gives about 180 minutes. Weight is about 307 g.

Engineering and use context

Conversion and amplification use an AKM AK4331 Hi-Fi DAC and headphone amplifier chip, rated for 96 kHz/24-bit. In the power circuit of the AK4331, Audio-Technica uses Rubycon PML-CAP chip capacitors, a thin-film polymer multilayer type, to lower noise and distortion.

For calls, two omnidirectional MEMS microphones work with beamforming, rated at -38 dB (1 V/Pa, 1 kHz) and 85 Hz - 15 kHz. Sidetone returns the wearer's voice during calls, and the microphone can be muted on the headphone itself. Buttons cover play and pause, track skip, volume and calls, and they also call up Siri or Google Assistant. Amazon Alexa is supported once the key assignment is changed in the app. Multipoint keeps two Bluetooth devices connected at once, and Google Fast Pair works with Android 6.0 or later.

Its Connect app offers a graphic or a parametric equaliser with four presets, 16, 32 or 64 volume steps, a low latency mode, codec switching and a function for finding the headphone. The unit switches itself off after 5 minutes without a connection.

Pairing

LDAC requires a source with that codec, and iPhones connect over AAC. The supplied 1.2 m cord with a gold-plated 3.5 mm L-plug allows wired use when the battery is flat. A 30 cm USB Type-A to Type-C cable and a pouch are included.

Alternatives

The ATH-M20xBT is Audio-Technica's entry-level Bluetooth version of the M-Series monitor headphone.

Spezifikationen

  • Modellbezeichnung

    ATH-M50xBT2

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    Over-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    15

  • Obere Grenzfrequenz +/- 10dB (Hz)

    28 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    99

  • Impedanz (Ohm (1 kHz))

    38

  • Wiedergabedauer (hours)

    Approx. 50 hours continuous use

  • Gewicht (g)

    307

  • Offizieller Link