Hifiverse

Kopfhörer - Audio-Technica ATH-CKS50TW2

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica ATH-CKS50TW2
Bildquelle - (c) Audio-Technica

The ATH-CKS50TW2 is Audio-Technica's next-generation version of the ATH-CKS50TW true wireless in-ear headphone in the SOLID BASS line. It went on sale in Japan on 11 October 2024. Its main addition is the patent-pending Magnetic Switch - the earpieces power on when pulled apart and power off when joined by their magnets.

Key specs that matter

Each earpiece uses a 9 mm dynamic SOLID BASS HD TWS driver. Frequency response is 5 - 20,000 Hz, sensitivity is 110 dB/mW and impedance is 20 ohms. With noise cancelling off, playback time is up to approx. 25 hours from the earpieces and 65 hours with the case, and with it on 15 and 40 hours. A 5-minute charge gives approx. 90 minutes of use. Bluetooth is Ver. 5.3 with A2DP, AVRCP, HFP and TMAP profiles, and codecs are LC3, AAC and SBC at 44.1 or 48 kHz and 16 bit. Earpieces are rated IP55 and weigh approx. 7.2 g each, the case approx. 51.5 g.

Engineering and use context

Behind the driver sits an acoustic space with a duct that controls the airflow. Noise cancelling is a hybrid digital system with two MEMS microphones per earpiece, one inside and one outside. It combines the feedforward and feedback methods, with digital signal processing through a filter of Audio-Technica's own design. Hear-through has two levels set in the app, and a talk-through function lowers playback for conversation.

LE Audio with the LC3 codec was added by a firmware update in October 2024. Multipoint keeps two Bluetooth devices connected at once, and range is 10 m line of sight. For calls, beamforming microphones work together with noise reduction, and talk time is up to 10 hours with noise cancelling off.

The case charges over USB in approx. 4.0 hours or on a Qi wireless charger in approx. 7.5 hours, and the earpieces recharge in approx. 2.5 hours. Its charging cable has overheat protection, and the case warns by fast LED flashing when it detects liquid or foreign objects at the terminals. A Tragus Hold Design shape keeps the earpieces clear of the tragus, and the Comfort Fit eartips combine two silicones of different hardness. The Connect app adds key assignment, left/right balance, an equaliser with four presets, 16, 32 or 64 volume steps, a low latency mode, Soundscape sounds, a leave-behind alert and a map of the last connected location. A 50 cm USB Type-A to Type-C cable and eartips in XS, S, M and L are included.

Pairing

A Bluetooth source is required. LE Audio with LC3 requires a source that supports LE Audio, and other sources connect over AAC or SBC.

Alternatives

The ATH-CKS50TW is the first-generation model, with feedforward noise cancelling, aptX Adaptive and up to 20 hours of playback from the earpieces.

Spezifikationen

  • Modellbezeichnung

    ATH-CKS50TW2

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    TWS

  • Untere Grenzfrequenz +/- 10dB (Hz)

    5

  • Obere Grenzfrequenz +/- 10dB (Hz)

    20000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    110

  • Impedanz (Ohm (1 kHz))

    20

  • Wiedergabedauer (hours)

    25 - 15 plus 40 - 25 via case

  • Gewicht (g)

    N/A

  • Offizieller Link