Hifiverse

Kopfhörer - Audio-Technica ATH-CKS30TW+

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio-Technica ATH-CKS30TW+
Bildquelle - (c) Audio-Technica

The ATH-CKS30TW+ is a true wireless in-ear headphone from Audio-Technica in the SOLID BASS series, with feedforward active noise cancelling. It is offered in four colours - BK (matte black), GR (evergreen), BG (light beige) and TBK (Translucent Black). Settings are made in the Audio-Technica Connect app.

Key specs that matter

Each earpiece uses a closed 9 mm dynamic driver. Sensitivity is 110 dB/mW, frequency response is 5 - 20,000 Hz and impedance is 20 ohms. Wireless connection is Bluetooth 5.1 with A2DP, AVRCP and HFP profiles, the AAC and SBC codecs and SCMS-T content protection, over a range of up to 10 m in line of sight. Battery life is up to 6.5 hours from the earpieces and 17.5 hours with the charging case with noise cancelling on, or 7.5 and 20 hours with it off. Charging takes about 2.5 hours for the earpieces and 3 hours for the case. The IP55 rating applies to the earpieces only. Each earpiece weighs about 4.5 g and the case about 28 g, or 4.6 g and 30 g for the TBK version.

Engineering and use context

The driver is an Audio-Technica design, with an acoustic space and a duct behind it to control the airflow. Besides noise cancelling there is a hear-through mode, with the ambient level set in the app, and a talk-through mode for short conversations and announcements. Five preset equalisers are available - Bass Boost - Deep, Bass Boost - Beat, Dynamic, Vocal and Clear. According to Audio-Technica, Bass Boost - Deep extends the low range below the adjustment range of a normal equaliser.

For calls an omnidirectional MEMS microphone is used, with a sensitivity of -38 dB (1 V/Pa, 1 kHz) and a 100 - 8,000 Hz range, positioned to reduce wind noise, and a sidetone function. A tragus hold design keeps the earpiece clear of the tragus. Touch sensor functions are user-assignable, and touch sensitivity is adjustable.

Multipoint connects two Bluetooth devices at once, and the app keeps a list of previously paired devices. A Low Latency Mode, Google Fast Pair, a leave-behind alert and a map of the last connected location are included. The earpieces switch on when taken out of the case and start charging when put back, and either one can be used alone. A slim charging case has a white and orange LED charge indicator and no wireless charging. A 50 cm USB Type-A to USB Type-C cable and XS, S, M and L eartips are supplied.

Pairing

A Bluetooth source with AAC support is required to use the AAC codec, and other Bluetooth sources connect over SBC.

Alternatives

The ATH-CKS50TW2 is another Audio-Technica true wireless model with active noise cancelling and a 9 mm driver.

Spezifikationen

  • Modellbezeichnung

    ATH-CKS30TW+

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    TWS

  • Untere Grenzfrequenz +/- 10dB (Hz)

    5

  • Obere Grenzfrequenz +/- 10dB (Hz)

    20 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wireless

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    110

  • Impedanz (Ohm (1 kHz))

    20

  • Wiedergabedauer (hours)

    Max. approx. 17.5 hours (if charging case is used in combination)

  • Gewicht (g)

    4.6 (ear) + 30 (case)

  • Offizieller Link