Hifiverse

Kopfhörerverstärker - Woo Audio WA24 20th Anniversary Edition

Beschreibung, Bilder, technische Daten und Spezifikationen

Woo Audio WA24 20th Anniversary Edition
Bildquelle - (c) Woo Audio

The WA24 20th Anniversary Edition is a single-ended tube headphone amplifier from Woo Audio of New York, introduced in September 2024 to mark the founding of the company in 2004. It is designed and assembled in New York. An anodised gold 20th Anniversary plaque sits on the chassis. The price starts at USD 12,999, and the warranty is a three-year limited warranty.

Key specs that matter

This is a single-ended, all-tube design, not a hybrid, operating in class A with zero feedback. The tube complement is four 3A/109E direct-heated triode power tubes. Inputs are one XLR and two RCA pairs. Headphone outputs are balanced 4-pin XLR and 4.4 mm Pentaconn, plus unbalanced 6.3 mm and 3.5 mm. Frequency response is 10 Hz - 40 kHz. Compatible headphones range from 8 to 600 ohms and from 74 to 120 dB sensitivity. Power consumption is 40 W at 100 - 240 V AC. Dimensions with tubes are 390 x 270 x 197 mm (L x W x H), and weight is 17 kg.

Engineering and use context

The signal path runs from the input through a STEP-UP Driver to the single-ended triode power tubes and then through the output transformer to the headphone outputs. Woo Audio developed the STEP-UP Driver in-house as a transformer with a nano-crystalline core and oxygen-free copper windings. The output transformers are oversized and also developed in-house.

Its 3A/109E tubes are custom-made mid-gain triodes, supplied as a closely matched quad. The amplifier is self-biasing and uses point-to-point wiring, PTFE-insulated silver-coated OFC wire and PTFE tube sockets. Audio-grade thin-film filter capacitors are used in the high-voltage power supply.

A two-tier chassis separates the tube amplifier on the upper level from the linear power supply on the lower level. The chassis is CNC-machined from a single block of aluminium and finished in black and gold anodised, sandblasted aluminium. Volume is set by an ALPS Alpine RK50 potentiometer in a brass enclosure, and the RCA inputs use WBT connectors.

Four 3A/109E tubes and a quick start guide are included, while the AC power cord and audio cables are not. A StradiTube PP3/250 quad is offered as a tube upgrade for USD 1,899.

Pairing

A line-level source with XLR or RCA outputs is required. Balanced headphones need a 4-pin XLR or 4.4 mm Pentaconn cable, and single-ended headphones connect through the 6.3 mm or 3.5 mm jack. An AC power cord has to be supplied separately.

Alternatives

The WA33 is a fully balanced tube headphone amplifier from Woo Audio.

Spezifikationen

  • Modellbezeichnung

    WA24 20th Anniversary Edition

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40000

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    390 x 270 x 197

  • Gewicht (kg)

    17

  • Offizieller Link