The SRM-400S is a semiconductor driver unit for electrostatic earspeakers from Stax of Japan, the company that describes itself as the founder of the earspeaker, active since 1938. It is the successor to the SRM-353X and follows the design and manufacturing method of the higher SRM-700S. Stax positions it for the Advanced Lambda series and as a step up from the entry-level SRS-3100 system. The manufacturer's suggested price in Japan is JPY 176,000 including tax.
Key specs that matter
Stax lists it as an all-stage FET configuration DC amplification driver unit. Frequency response is DC - 90 kHz with one SR-L500 MK2 connected. Gain is 60 dB, and harmonic distortion is 0.01% or less (1 kHz, 100 Vrms output). Maximum output voltage is 400 Vrms (1 kHz), and bias voltage is DC 580 V. Input impedance is 50 kohm on RCA and 50 kohm x 2 on XLR. One RCA and one XLR input are provided as mutually exclusive inputs, plus an RCA parallel output terminal. Power consumption is 30 W. Dimensions are 195 x 102 x 376 mm (W x H x D, protrusions included), and weight is 3.4 kg. Rated operating conditions are 0 to 35 °C and less than 90% humidity, non-condensing.
Engineering and use context
As in earlier Stax units, the signal circuit is a complete DC amplifier with no coupling capacitors. A custom-made low-noise dual FET is installed in the first stage, and FETs are also used in the last stage. Each dual FET is measured for left and right channel characteristics and selected in matched pairs, the method used in the SRM-700S.
Besides the conventional power transformer for the high-voltage circuit, a newly designed power transformer with a winding for the low-voltage circuit is installed. According to Stax, this low-voltage winding improves power efficiency compared with earlier units such as the SRM-353X. The chassis is wider and more rigid than that of the SRM-353X and has a hybrid structure with a large share of non-magnetic aluminium to reduce the effect of vibration.
On the front panel are two earspeaker sockets marked for Pro-type earspeakers only, next to the custom concentric dual volume knob common to Stax products. Silver and black versions are offered.
Pairing
Pro-bias Stax earspeakers are required. The matching models are the Advanced Lambda series, such as the SR-L500 MK2. Sources with either balanced XLR or single-ended RCA outputs connect directly.
Alternatives
The SRM-700S is the higher Stax semiconductor driver unit whose FET design the SRM-400S inherits.