The Retro Nano is a Bluetooth DAC and headphone amplifier from SnowSky, the FiiO sub-brand, with the look of a classic tape player. Its 80 x 160 colour IPS screen shows a UI that simulates a turning tape, and the UI theme changes with a single press. White and blue versions are offered. It was released on 29 March 2025 at USD 59.99.
Key specs that matter
Output power is 220 mW + 220 mW into 32 ohms from the 4.4 mm balanced jack and 100 mW + 100 mW into 32 ohms from the 3.5 mm single-ended jack, both at THD+N below 1%. FiiO specifies SNR of 128 dB or more (A-weighted), noise floor below 1 µV on both outputs, THD+N below 0.0018% (1 kHz, -4 dB, 32 ohms) and output impedance below 0.3 ohm (32 ohms). Frequency response is 20 Hz - 40 kHz (-3 dB). The asynchronous USB DAC works driver-free up to PCM 96 kHz. Battery life is about 7.5 hours per cell, and charging takes 2 hours or less from DC 5 V 1 A. Size is about 55.1 x 37.5 x 13.7 mm, and weight is about 28.3 g including the battery.
Engineering and use context
Conversion uses two Cirrus Logic CS43131 chips, one per channel. Its Bluetooth chip is a Qualcomm QCC5125 with a dual-core CPU and DSP. It supports Bluetooth 5.1 with LDAC, aptX Adaptive, aptX HD, aptX LL, aptX, AAC and SBC.
Power comes from a replaceable, rechargeable 3.7 V lithium cell compatible with the 10440 size, and 1.5 V AAA batteries cannot be used. A spent cell can be swapped for a charged one, and with USB power the unit also runs without a battery. A double press of the multi-function button switches between Bluetooth (BT), computer (PC) and PHONE modes.
Eight sound presets are built in, including retro-themed ones. Further tuning is possible in the FiiO Control app or on the web, and OTA firmware updates are supported. Inline microphone, volume and play/pause controls follow the CTIA standard. Supplied items are a Type-C to Type-C cable, a battery, a battery storage case, a lanyard, two stickers and a quick start guide.
Pairing
Headphones with balanced 4.4 mm cables use the balanced jack, and single-ended 3.5 mm cables the other output. A phone or computer connects with the supplied Type-C cable. Active speakers can be connected to the headphone output to play Bluetooth audio.
Alternatives
Within the SnowSky range, FiiO also makes the Melody, a USB DAC and headphone amplifier with single-ended and balanced outputs.