Hifiverse

Kopfhörerverstärker - Matrix Audio NA-1

Beschreibung, Bilder, technische Daten und Spezifikationen

Matrix Audio NA-1
Bildquelle - (c) Matrix Audio

The NA-1 is a headphone amplifier and preamplifier from Matrix Audio of China, part of the N Series separates system with the NT-1 Digital Audio Transport and the ND-1 Audio DAC. It launched in March 2026 and went on sale in April 2026 at EUR 2,999. Its circuit is fully discrete, pure Class A and fully balanced, with four independent amplification units.

Key specs that matter

Single-ended output power is 7 W into 33 ohms, 1.1 W into 300 ohms and 580 mW into 600 ohms (1% THD). Balanced, the figures are 18 W, 4.5 W and 2.3 W. The headphone outputs have +17 or +23 dB of gain, 20 Hz - 20 kHz (+0, -0.1 dB) with -3 dB at 170 kHz, THD+N below 0.0007% (20 Hz - 20 kHz), SNR of 120 or 123 dB (A-weighted) and output impedance below 1 ohm. Crosstalk is -134 dB balanced and -126 dB single-ended. At the pre-outs gain is +15 or +21 dB, the -3 dB point is 140 kHz, THD+N is below 0.0003%, SNR is 121 or 124 dB and output impedance is below 20 ohms. Inputs are one XLR and two RCA pairs, all 47 kOhm. Headphone outputs are 6.35 mm single-ended, 4.4 mm and 4-pin XLR balanced. Idle consumption is 35 W and maximum below 80 W. It measures 330 x 97 x 275 mm (W x H x D) and weighs 6.16 kg.

Engineering and use context

Matrix uses a vertically layered layout. Preamp circuitry, the linear power supply and the filter capacitor array are on the lower board, and the headphone stage is on the upper board, physically isolating the voltage and current amplification stages. An independent preamp circuit is powered by 60 V rails. Each output, headphone and preamp, has its own dual-gain control, and high gain on the headphone side gives increased voltage swing for high-impedance headphones.

Volume is set by a motor-driven quad-unit ALPS Type 27 potentiometer, and its knob rotates when the level is changed from the IR remote. Power comes from an 80 W potted toroidal transformer in a metal magnetic shielding enclosure and a capacitor array of up to 39,000 µF, with independent supplies for the preamplifier and the power amplification circuits. Its CNC aluminium chassis is equipped with the MA-DAMPER PRO isolation damper, developed with Audio Bastion from five materials. Trigger in and out connections are provided.

Pairing

The matching DAC is the ND-1, and the matching transport is the NT-1. Its XLR and RCA pre-outs connect to a power amplifier or active speakers.

Alternatives

The NA-1 is the only stand-alone headphone amplifier in the current Matrix Audio range.

Spezifikationen

  • Modellbezeichnung

    NA-1

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    7000 (SE), 18 000 (Balance)

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    1100 (SE), 4500 (Balance)

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    580 (SE), 2300 (Balance)

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    +15dB/+21dB

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    < 0.0003

  • Signal-Rausch-Abstand (dB)

    121

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    -134

  • Ausgangsimpedanz (Ohms)

    20

  • Abmessungen (mm)

    330 x 275 x 97

  • Gewicht (kg)

    6.16

  • Offizieller Link