Hifiverse

Kopfhörerverstärker - Chord MOJO 2

Beschreibung, Bilder, technische Daten und Spezifikationen

Chord MOJO 2
Bildquelle - (c) Chord

The Mojo 2 is a portable, battery-powered DAC and headphone amplifier from Chord Electronics of Kent, England, launched on 31 January 2022 as the successor to the original Mojo. Conversion runs on a custom-coded FPGA, programmed by Chord's design consultant Rob Watts. Its UK launch price was GBP 449. In late 2025 Chord revised the hardware with a 4.4 mm headphone output and switchable USB-C charging, at GBP 395.

Key specs that matter

Output power at 1% distortion is 600 mW into 30 ohms (4.2 V RMS) and 90 mW into 300 ohms (5.2 V RMS). Output impedance is 0.06 ohms, and Chord lists support for headphones up to 800 ohms. Dynamic range is 125 dB and signal-to-noise ratio 123 dB, both A-weighted, with noise of 2.7 µV (A-weighted). THD+N is 0.0003% (2.5 V, 300 ohms), and stereo separation is 118 dB (1 kHz, 300 ohms, 2.5 V). Frequency response is 7 Hz - 20 kHz (±3 dB). PCM is accepted up to 768 kHz/32-bit and DSD up to DSD256 via DoP. Battery life is about 8 hours. The CNC-milled aluminium case measures 83 x 62 x 22.9 mm and weighs 185 g.

Engineering and use context

Chord's WTA (Watts Transient Aligned) filter has 40,960 taps computed on 40 DSP cores. The UHD DSP uses a 104-bit custom DSP core running at 705/768 kHz, and Chord describes it as a lossless digital tone control. It has four modes - lower bass, mid-bass, lower treble and high treble - each with nine 1 dB lift and nine 1 dB cut steps. Crossfeed has three levels plus off. According to Chord, the Mojo 2 is DC-coupled with a digital DC servo.

Four polychromatic polycarbonate control spheres set volume, and the menu sphere gives access to mute, crossfeed, button lock, USB-C charging and tone control. Battery management is FPGA-controlled, with a 75% reduction in power loss and a 9% capacity gain over the original. Left on charge, the unit enters Intelligent Desktop Mode, which regulates charging to preserve the battery.

Digital inputs are coaxial via a 3.5 mm jack (single or dual-data, 768 kHz), Micro-USB (768 kHz), USB-C and optical (96 kHz), and a separate Micro-USB socket charges the battery. Both headphone outputs, 3.5 mm and 4.4 mm, keep their own volume, DSP and crossfeed settings. A Micro-USB to USB Type-A cable is included.

Pairing

Chord lists compatibility with Android, Windows and Linux, and the Mojo 2 is Roon tested. The matching Chord Poly streamer/server attaches to the case and adds wireless streaming, network audio and SD card playback, for a combined weight of 270 g.

Alternatives

The Chord Hugo 2 is the larger battery-powered DAC and headphone amplifier in the Chord range.

Spezifikationen

  • Modellbezeichnung

    MOJO 2

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    600

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    90

  • Untere Grenzfrequenz +/- 3dB (Hz)

    7

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    0.0003 (at 2.5 V at 300 ohms)

  • Signal-Rausch-Abstand (dB)

    123

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

    N/A