Hifiverse

Kopfhörerverstärker - Ampsandsound Kenzie Reimagined

Beschreibung, Bilder, technische Daten und Spezifikationen

Ampsandsound Kenzie Reimagined
Bildquelle - (c) Ampsandsound

The Kenzie Reimagined is a tube headphone amplifier from ampsandsound, the Southern California company of designer Justin Weber. Its Kenzie circuit is one of the oldest designs in the catalogue and is inspired by the darling circuit. This version moves it from the original wood chassis onto a modern chassis and unifies the variants built over the years in one amplifier. It made its debut at AXPONA 2026 and is priced at USD 6,000.

Key specs that matter

Rated THD is 0.7% at 750 mW, with THD+N of 0.8% and noise of 30 µV. Gain is 18 dB with a 12AX7 in the input socket. Frequency response is 7 Hz - 35 kHz (-3 dB). Input impedance is 10 kohms, and 520 mV of input is needed for full output. According to ampsandsound, power and noise figures depend on the tubes in use. The chassis measures 305 x 254 x 152 mm (W x D x H).

Engineering and use context

A 5751 or 12AX7 is supplied for the input stage, and any 12A*7 type can be used there. Its output stage uses 1626 or VT-137 tubes, a Second World War type built as a transmitter tube for radar installations. Cathode bias (automatic bias) allows tube changes without adjustment. Compared with the earlier Kenzie, the company cites higher output power, a lower noise floor and wider bandwidth.

New custom output transformers, wound by hand, provide 8 ohm speaker taps, a 32 ohm 4-pin XLR output and 300 ohm XLR outputs. The speaker taps can be switched off in the same way as on the Nautilus and Red October. Two 6.35 mm jacks, marked Low-Z and Hi-Z, complete the outputs. Volume is set by an Alps potentiometer. A large power transformer and a choke form the supply. Each unit is handmade in Southern California from US-sourced parts. The stock finish is a black chassis, transformer cover and cage with black mesh, and other colours can be ordered at extra cost.

Pairing

Headphones of 8 to 200 ohms connect to the Low-Z jack, and models above 200 ohms to the Hi-Z jack. Balanced headphones connect to the 32 ohm 4-pin XLR or the 300 ohm XLR outputs. Efficient 8 ohm loudspeakers connect to the speaker taps.

Alternatives

The ampsandsound LeeLoo Reimagined is another tube headphone amplifier in the current range, listed at the same USD 6,000.

Spezifikationen

  • Modellbezeichnung

    Kenzie Reimagined

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    750

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    7

  • Obere Grenzfrequenz +/- 3dB (Hz)

    35 000

  • Verstärkung (dBu)

    18

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    0.7 at 750 mW

  • Signal-Rausch-Abstand (dB)

    N/A

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    305 х 254 x 152

  • Gewicht (kg)

    N/A

  • Offizieller Link