Hifiverse

Kopfhörerverstärker - Gold Note HP-10

Beschreibung, Bilder, technische Daten und Spezifikationen

Gold Note HP-10
Bildquelle - (c) Gold Note

The HP-10 is a dual-mono Class A balanced headphone amplifier in the 10 Series of Gold Note. It has a touchscreen, four headphone outputs, line outputs for use as a line preamplifier and a bypass function for systems with a separate preamplifier. Gold Note lists two models - the HP-10 with analogue inputs only, and the HP-10 Deluxe, which adds an AKM AK4493 DAC, a USB-C input and Bluetooth 5.1 aptX HD. The Deluxe is priced at EUR 2,390 or USD 2,599.

Key specs that matter

Headphone power output is 10 W max. Headphone outputs are 3.5 mm and 6.3 mm unbalanced, plus 4.4 mm and 4-pin XLR balanced, all on the front panel. Analogue inputs are one RCA (5 Vrms max) and one XLR (8 Vrms max), and line outputs are one RCA and one XLR. On the Deluxe, the USB-C input accepts PCM up to 768 kHz and DSD512. Frequency response is 20 Hz - 20 kHz (±0.3 dB), THD+N is 0.015% at 1 kHz and signal-to-noise ratio is 110 dB. Power consumption is 25 W max. Dimensions are 200 x 80 x 260 mm (W x H x D) and weight is 3.5 kg net.

Engineering and use context

Its audio path is entirely analogue and built from discrete components, and every setting is applied in real time in the analogue domain. Gold Note groups these settings under the name Studio. Crossfeed has four modes, acting on the full spectrum or on the lows, mids or highs, and the analogue EQ offers a Harman curve and a Superflat setting. Gain and damping factor (High or Low) are variable, and a phase switch selects 0 or 180°. Balance sets the level of the left and right channels separately. Playback is stereo or mono, the channels can be swapped in stereo, and mono gives the sum L+R or one channel alone. When the line outputs are selected, the Studio settings still apply.

Bypass is activated by selecting one of the four front headphone outputs and putting the unit into standby, and the preamplifier connected to the HP-10 is then used for loudspeaker listening with the system wiring unchanged. Operation is by touchscreen, rotary knob or the included remote control, and a trigger IN/OUT connection switches the rest of the system on with the amplifier. A PSU-10 EVO external inductive power supply is offered as an upgrade. Finishes are black, silver and gold anodised aluminium.

Pairing

For bypass operation, the source and the preamplifier connected to the HP-10 must both use RCA or both use XLR. The line outputs connect to a power amplifier such as the PA-10 EVO. On Windows, the USB-C input of the Deluxe requires Gold Note's dedicated driver.

Alternatives

The HP-5.2 is the dual-mono Class A headphone amplifier of the Gold Note 5.2 Series, with a Sabre DAC and Bluetooth 5.2 aptX HD.

Spezifikationen

  • Modellbezeichnung

    HP-10

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20000

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    0.015

  • Signal-Rausch-Abstand (dB)

    110

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    200 x 80 x 260

  • Gewicht (kg)

    3.5

  • Offizieller Link