The HA-L7A is a headphone amplifier from Yamaha with a built-in DAC and preamplifier outputs. It launched on 20 February 2024 at a UK price of GBP 3,499 as the partner for Yamaha's YH-5000SE headphones. Yamaha combines its hi-fi amplifier circuits with the CINEMA DSP sound field technology of its AV receivers.
Key specs that matter
Frequency response is 4 Hz - 80 kHz (-3 dB). The 6.3 mm, 4.4 mm and XLR4 headphone outputs each deliver 1,000 mW + 1,000 mW (1 kHz, 0.01% THD, 32 ohms). THD is ≤0.003% (digital in, 1 kHz, 300 mW, 32 ohms), and SNR is >120 dB. Recommended headphone impedance is 32 - 600 ohms. Inputs are RCA, optical (PCM to 96 kHz/24-bit), coaxial (PCM to 192 kHz/24-bit) and USB Type-B with PCM up to 384 kHz/32-bit and DSD up to 11.2 MHz (ASIO native and DoP). Pre/line outputs are XLR and RCA. Power consumption is 19 W, or 0.2 W in standby. Dimensions are 333 x 133 x 189 mm (W x H x D), and weight is 5.3 kg.
Engineering and use context
D/A conversion uses an ESS ES9038PRO, whose eight internal channels are split four per side. For USB playback Yamaha uses two dedicated clocks, a 44.1 kHz system and a 48 kHz system, with low-phase-noise crystal oscillators placed near the DAC, and the Yamaha Steinberg driver works in asynchronous transfer. Eight digital filter modes are available, including Yamaha's own low-latency filter. Analogue inputs pass through an ES9842QPRO converter, and the volume IC is a MUSES72323.
Every major stage after the DAC is balanced and discrete, and unbalanced inputs are converted to balanced inside the unit. On the front panel the XLR jacks are by Neutrik, the 4.4 mm 5-pole jack is a Pentaconn part and the 6.3 mm jack is gold-plated. Yamaha's patented Floating and Balanced Power Amplifier circuit uses four power amplifier sets, floated from ground, for symmetrical push-pull operation of the output stage. Two toroidal transformers with bifilar windings supply the front-stage signal circuitry and the amplifier section separately. Main, amplifier and power supply circuits sit on three isolated boards, and the main board is multilayer.
An 8 mm extruded aluminium panel forms the L-shaped top. A 2 mm steel plate carries the toroidal transformer, the rear panel is double, and five conical steel feet with dampers support the chassis. SOUND FIELD mode offers six programmes plus STRAIGHT, while Pure Direct bypasses the DSP and A/D conversion.
Pairing
The matching headphones are the Yamaha YH-5000SE. XLR and RCA pre-outs allow connection to a power amplifier or active speakers.
Alternatives
Yamaha currently offers no other headphone amplifier besides the HA-L7A.