Hifiverse

Kopfhörerverstärker - Zähl H1

Beschreibung, Bilder, technische Daten und Spezifikationen

Zähl H1
Bildquelle - (c) Zähl

The H1 is a reference headphone amplifier from Zähl Elektronik-Tontechnik of Bergisch Gladbach, a maker of analogue studio technology for more than 35 years whose current flagship is the AM1 analogue mixing console. Michael Zaehl began in 1978 as an assistant in Conny Plank's studio and has run his own business since 1982. The H1 has the power supply design, the switchable power amp stage and the stereo base control of its sister product, the HM1 headphones mixing amplifier, without the mixing stage, A/B comparison, high and low frequency equaliser and preamplifier function. It is designed and manufactured in Germany. Recommended retail price is EUR 6,500 excluding VAT and import duties, and the US price is USD 7,999.

Key specs that matter

Output power per side is 4 W RMS into 30 ohms and 7 W RMS into 15 ohms, with peak figures of 7.6 W/30 ohms, 11 W/15 ohms and 12 W/10 ohms (18 W for 1.5 ms). Maximum output level is +23 dBu. Output impedance is 0.8 ohm in Class A and 0.045 ohm in Class A & Servo, and THD is 0.07% and 0.0005% respectively (typ. at +20 dBu, 30 ohm load, 2 W RMS). Frequency response is 10 Hz - 30 kHz (±0.05 dB) and 1 Hz - 500 kHz (better than -3 dB at +6 dBu). Line input impedance is 20 kohms. Voltage gain is +6 dB, -4 dB or +16 dB with the gain switch at 0, -10 or +10. Noise is -101.5 dBu at maximum volume with gain at 0. Size is 195 x 90 x 300 mm (W x H x D), and weight is 4.5 kg.

Engineering and use context

Zähl describes the H1 as a Class A power amplifier in its purest form, with no crossover distortion and no feedback artefacts. Its power stage consumes almost 40 W at idle. In Class A & Servo mode negative feedback is added while Class A operation is kept, and Zähl states that output resistance then drops below the sum of headphone cables and connectors.

Each channel has its own supplies for the preamplifier and power amplifier, from independent windings on a toroidal mains transformer. A separate winding serves the logic and front-panel indicators, and the two grounds meet at one point only. Since there is no EQ or mixing stage, the transformer could be integrated in a mumetal housing, and no external power adapter is needed.

Stereo base control uses the mid/side technique instead of cross-feed. Only the side signal level changes, the leftmost position is mono, and in the centre position the stage is bypassed by relays. Balance is set by a precision potentiometer with 21 detents.

Pairing

The 4-pin XLR, Pentaconn and 6.35 mm jack outputs are wired in parallel for alternative use. Line inputs are balanced XLR or unbalanced RCA. The -10 dB gain setting is recommended for IEMs.

Alternatives

The Zähl HM1 adds mixable inputs, A/B comparison, an equaliser and a preamplifier function to the same power stage.

Spezifikationen

  • Modellbezeichnung

    H1

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    7600

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    1

  • Obere Grenzfrequenz +/- 3dB (Hz)

    500 000

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link