The Europa is a fully differential tube headphone amplifier and preamplifier from Saros Audio Systems, the brand started by Drew Baird, founder of Moon Audio. It is the company's first product and is hand-assembled in Cary, North Carolina. The launch price was USD 8,495, and Moon Audio, which sells it, later listed it at USD 8,995.
Key specs that matter
Tube complement is two 6922 in the preamplifier stage (6DJ8, ECC88 or 6N23P can be used instead), two 6H30P drivers and one 6BW4 full-wave rectifier. Five Lundahl parts are used - the 1676 input transformer, the 1689AM/PP output transformer, the 1683 power transformer and a choke. Voltage gain is 15.6 dB and output impedance is 16 ohms. Headphones from 16 to 600 ohms with a sensitivity of 74 to 120 dB are specified. Output noise is -75 dB (A-weighted) and frequency response is 10 Hz - 20 kHz. Inputs are one balanced XLR and two RCA, with one XLR and one RCA preamplifier output. Headphone outputs are 4-pin XLR, 4.4 mm TRRRS and 6.3 mm. Power is 115 V AC with 30 W consumption. Dimensions are 362 x 343 x 152 mm and weight is 9.5 kg.
Engineering and use context
Saros specifies a two-stage tube circuit with a dual role, headphone amplification and line preamplification. In balanced configurations with the ground lifted, the Europa is fully differential. Its 6922 preamplifier stage directly drives the 6H30P tubes, and high-voltage rectification is by the 6BW4. According to Saros, the Lundahl input transformer steps down the input voltage while increasing current capacity.
Volume is set by an Elma stepped attenuator with 24 positions, and a 48-position version is offered as an option. Critical signal-level resistors are VPG Z-Foil types, with Dale resistors elsewhere. Capacitors are from Mundorf, with Panasonic parts on the low-voltage DC rails, and the signal path is wired with Moon Audio Bronze Dragon Graphene UPOCC copper. Acoustic damping material is placed at critical locations inside. A silver CNC-finished front panel sits on a black anodised aluminium chassis. Warranty is three years.
Pairing
Balanced headphone cables with a 4-pin XLR or 4.4 mm plug use the differential output. As a preamplifier it needs a power amplifier or active loudspeakers with XLR or RCA inputs.
Alternatives
Saros Audio Systems has no other headphone amplifier, since the Europa is its first and only product.