Hifiverse

Kopfhörerverstärker - Feliks Audio ECHO VIBE

Beschreibung, Bilder, technische Daten und Spezifikationen

Feliks Audio ECHO VIBE
Bildquelle - (c) Feliks Audio

The Echo Vibe is a hand-crafted tube headphone amplifier and preamplifier from Feliks Audio of Lubliniec, Poland. Feliks Audio presents it as the revised version of its Echo, with engraved wood and a new form. Its price is EUR 999.

Key specs that matter

It is an OTL (output transformerless) design with two 6N6P power tubes and two 6N1P driver tubes. Power output is 350 mW and gain is 20 dB. Frequency response is 15 Hz - 45 kHz (±3 dB), THD is 0.4% (300 ohms, 20 mW) and input impedance is 100 kohms. Optimal headphone impedance is 80 - 600 ohms, with one 6.35 mm jack output. Mains voltage is 230 V or 120 V, chosen at order. The chassis measures 268 x 217 x 118 mm and weighs 3.5 kg.

Engineering and use context

Its power supply is based on a custom stabilised toroidal transformer with electronic ripple suppression and delayed application of the anode voltages. The amplifier is equipped with an automatic bias circuit and needs no re-tuning after a tube change. Stock tubes are NOS 6N6P and NOS 6N1P, which can be replaced with E88CC, 6N23P, 6DJ8 or 6922 driver tubes and 6N6Pi power tubes. All four sit in gold-plated ceramic sockets.

On the rear panel are three line inputs, a line output for pre-amp mode and an IEC mains inlet with a 1.25 A fuse. A source selector with a mute position and the volume control are on the front. Input and output safeguards suppress switch-on and switch-off noises, and the pre-amp mode has its own protection. Side panels are solid oak. The box contains the amplifier, both pairs of tubes, an AC cord, a user manual and a warranty card. Warranty is three years, with six months on the tubes.

Pairing

Headphones of medium or high impedance are the intended load. In pre-amp mode the line output connects to a tube or solid-state power amplifier.

Alternatives

The Feliks Audio Echo Classic is a simplified version with the same 350 mW, 20 dB and 15 Hz - 45 kHz ratings.

Spezifikationen

  • Modellbezeichnung

    ECHO VIBE

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    N/A

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    350

  • Untere Grenzfrequenz +/- 3dB (Hz)

    15

  • Obere Grenzfrequenz +/- 3dB (Hz)

    45 000

  • Verstärkung (dBu)

    N/A

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    0.4

  • Signal-Rausch-Abstand (dB)

    N/A

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    N/A

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    N/A

  • Ausgangsimpedanz (Ohms)

    N/A

  • Abmessungen (mm)

    268 × 217 × 118

  • Gewicht (kg)

    3.5

  • Offizieller Link

Weitere Komponenten