The DX-3 is a headphone amplifier from Rotel that also works as a standalone DAC and as a preamplifier with balanced XLR and RCA outputs. It reached Europe and the UK in March 2025, with other markets following, at a suggested price of USD 1,499. Black and Silver finishes are offered.
Key specs that matter
Power output (THD+N < 1%) from the 6.35 mm single-ended jack is 765 mW into 16 ohms, 383 mW into 32 ohms and 41 mW into 300 ohms. From the 4.4 mm balanced jack it is 2.8 W, 1.4 W and 150 mW into the same loads. THD (32 ohms, 1 kHz) is below 0.008% at 70 mW single-ended and below 0.004% at 270 mW balanced. Headphone output impedance is below 0.3 ohm single-ended and below 0.6 ohm balanced, and S/N ratio (IHF A-weighted) is above 100 dB and above 110 dB respectively. Gain is 0 dB, -6 dB or -12 dB, and recommended headphone impedance is 16 - 300 ohms. Line output level is 1 Vrms from 100 ohms (RCA) and 2 Vrms from 200 ohms (XLR) for analogue sources, and 1.6 Vrms and 3.5 Vrms for digital sources. Dimensions are 215 x 73 x 247 mm (W x H x D), weight is 3.2 kg, and power consumption is 30 W.
Engineering and use context
Conversion is by an ESS Sabre ES9028PRO, an 8-channel DAC rated at 32-bit/768 kHz. Downstream of it, Rotel implements the analogue output filters externally with discrete components of its own design. The headphone amplifier operates in class A, and the whole circuit is fully balanced and differential. Its power supply is a shielded toroidal transformer manufactured in-house, with high current drivers and high grade filter capacitors. Volume attenuation uses an NJW1195A analogue controller in steps down to 0.5 dB.
On the digital side the PC-USB input is USB Audio Class 2.0 up to 32-bit/384 kHz, with DSD up to 11.2 MHz and DoP up to 5.6 MHz, and a driver installation is required on Windows. Coaxial and optical inputs accept S/PDIF LPCM up to 24-bit/192 kHz. Bluetooth supports aptX HD and AAC. The RCA analogue input has 1.2 V sensitivity into 10 kohms, a 5 V overload point and channel separation above 86 dB at 10 kHz. A full-colour front panel display provides all user feedback, the remote control is extruded aluminium, and the DX-3 is certified Roon Tested.
Pairing
Headphones from 16 to 300 ohms with a 4.4 mm balanced or 6.35 mm single-ended plug are supported. The XLR and RCA outputs can drive powered loudspeakers or an external power amplifier directly. A USB Audio Class 2.0 source is required for the full PCM and DSD range.
Alternatives
Rotel has no other dedicated headphone amplifier in its current range.